Threaded Stud Alloy Steel 5/8-11 x 3-1/2"
(Pack of
10.0)
• Unplated
• Stamped B7 on one end for material identification purposes
• Fully chamfered ends
• UNC coarse threads
• Conforms to ASTM A193 and ASME SA193 B7 specifications
• 125,000 PSI minimum tensile strength at room temperature. For maximum allowable stress value at specific temperatures, refer to ASME Boiler and Pressure Code Section VIII.
Used in most piping and flange applications requiring a high-strength ferrous steel bolt capable of operating in a temperature range of –20°F to +750°F (–29°C to +399°C) when used with Grade 2H nuts.
Couldn't load pickup availability
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
Catalog Page#: 3-70
Frequently Bought Together
USS Flat Washer Low Carbon Steel 1/4"
Couldn't load pickup availability
SAE Flat Washer Thru-Hardened Steel 3/4"
Couldn't load pickup availability
SAE Flat Washer Thru-Hardened Steel 5/8"
Couldn't load pickup availability
Threaded Stud Alloy Steel 1/2-13 x 3-1/2"
Couldn't load pickup availability
Threaded Stud Alloy Steel 1/2-13 x 2-1/2"
Couldn't load pickup availability
Threaded Stud Alloy Steel 1/2-13 x 4"
Couldn't load pickup availability
Hex Nut Grade 8 Alloy Steel 1/4-20
Couldn't load pickup availability
Hex Nut Grade 5 Steel 1/4-20
Couldn't load pickup availability
SAE Flat Washer Thru-Hardened Steel 5/16"
Couldn't load pickup availability
Stud Fully Threaded Carbon Steel 5/16-18 x 2"
Couldn't load pickup availability
Stud Fully Threaded Carbon Steel 5/16-18 x 3"
Couldn't load pickup availability
Stud Double Ended Threaded SS 5/8-11 x 3-1/2"
Couldn't load pickup availability
Product Description
• Unplated• Stamped B7 on one end for material identification purposes
• Fully chamfered ends
• UNC coarse threads
• Conforms to ASTM A193 and ASME SA193 B7 specifications
• 125,000 PSI minimum tensile strength at room temperature. For maximum allowable stress value at specific temperatures, refer to ASME Boiler and Pressure Code Section VIII.
Used in most piping and flange applications requiring a high-strength ferrous steel bolt capable of operating in a temperature range of –20°F to +750°F (–29°C to +399°C) when used with Grade 2H nuts.
Technical Specifications
| Item#: | 96413 |
|---|---|
| Diameter | 5/8 " |
| Thread Pitch | 11 |
| Thread | Coarse |
| Length | 3-1/2 " |
| Grade | B7 |
| Material | Alloy Steel |
| Type | B7 Alloy Studs |
| Finish | Plain |
| Strength | 125,000 PSI |
| Size | 5/8X3-1/2 " |
| UNSPSC #: | 31163300 |
| TAA Compliant: | No |
| Weight: | 2.51 lb |
Product Restrictions
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
