Tru-Shrink Heat Shrink Tubing 4/0 to 400 MCM Black
(Pack of
2.0)
Insulate and protect larger electrical wires with this heat shrink tubing. Designed to fit over thick electrical wires and ideal for applications like motor control, power distribution, and large appliance wiring. The tubing shrinks tightly around the wire to provide protection against moisture, dust, chemicals and other environmental factors that could cause damage. Manufactured for use in harsh maintenance applications where abrasion, heat, fluids and fungus are present.
3:1 shrink ratio
Heat-activated adhesive liner surrounds material and produces a watertight seal
Non-corrosive with excellent fluid and fungus resistance non-nutrient, inert
Meets UL Flammability Test Specification 94V2 and UL Specification 486D
Elongation: 425%
Minimum tensile strength: 1,542 PSI
Minimum dielectric strength: 275V/mil
Low-temperature flexibility: Four hours at 67°F (55°C)
Maximum continuous operating temperature: 194°F (90°C)
Longitudinal change: 15% maximum, less than 5% typical
Rated at 600V
Designed for use in harsh maintenance applications where abrasion, heat, fluids and fungus are present
Wire gauge coverage is approximate due to the wide variance of wire thicknesses.
Couldn't load pickup availability
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
Catalog page#: 17-30
Frequently Bought Together

Vinyl Electrical Tape Black 3/4" x 66', 10 Rolls Per Pack
Couldn't load pickup availability

Butt Connector 12 to 10 AWG Clear
Couldn't load pickup availability

Cable Tie 5.5" Black
Couldn't load pickup availability

Adhesive Heat Shrink Tubing 22 to 10 AWG Clear/Red
Couldn't load pickup availability

Adhesive Heat Shrink Tubing 16 to 8 AWG Clear/Blue
Couldn't load pickup availability

Tru-Shrink Heat Shrink Tubing 12 to 10 AWG Black
Couldn't load pickup availability

Rechargeable Neck Light
Couldn't load pickup availability

SAE Flat Washer Thru-Hardened Steel 5/8"
Couldn't load pickup availability

USS Flat Washer Thru-Hardened Steel 1/2"
Couldn't load pickup availability

Tru-Shrink Heat Shrink Tubing 20 to 18 AWG Black
Couldn't load pickup availability

Vinyl Electrical Tape Red 3/4" x 66'
Couldn't load pickup availability

Tru-Shrink Heat Shrink Tubing 8 to 4 AWG Black
Couldn't load pickup availability
Product Description
Insulate and protect larger electrical wires with this heat shrink tubing. Designed to fit over thick electrical wires and ideal for applications like motor control, power distribution, and large appliance wiring. The tubing shrinks tightly around the wire to provide protection against moisture, dust, chemicals and other environmental factors that could cause damage. Manufactured for use in harsh maintenance applications where abrasion, heat, fluids and fungus are present. 3:1 shrink ratio
Heat-activated adhesive liner surrounds material and produces a watertight seal
Non-corrosive with excellent fluid and fungus resistance non-nutrient, inert
Meets UL Flammability Test Specification 94V2 and UL Specification 486D
Elongation: 425%
Minimum tensile strength: 1,542 PSI
Minimum dielectric strength: 275V/mil
Low-temperature flexibility: Four hours at 67°F (55°C)
Maximum continuous operating temperature: 194°F (90°C)
Longitudinal change: 15% maximum, less than 5% typical
Rated at 600V
Designed for use in harsh maintenance applications where abrasion, heat, fluids and fungus are present
Wire gauge coverage is approximate due to the wide variance of wire thicknesses.
Technical Specifications
Item#: | 89557 |
---|---|
Type | Pre-Cut |
Style | Heavy Wall |
Wire Gauge Coverage | 4/0-400 MCM AWG |
Length | 8 " |
Color | Black |
I.D. Before Shrinkage | 1.50 " |
I.D. After Shrinkage | .500 " |
Shrink Ratio | 3 to 1 |
Wall Thickness After Shrinkage | 0.140 " |
Voltage Rating | 600 V |
Temperature Rating | 194 °F |
Elongation | 425 % |
Tensile Strength | 1,542 PSI |
Approvals | UL, CSA |
UNSPSC #: | 39121723 |
TAA Compliant: | Yes |
Weight: | 0.25 lb |
Product Restrictions
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
