Two-Ear Hose Clamp 0.315 to 0.433"
(Pack of
25.0)
• Medium-pressure clamp, installed on air, fluid, gas and steam lines
• One-piece design offers a positive, tamper-proof seal without damaging the hose
• Assures adequate closure and compensates for tolerance variations in hose sizes
• Zinc-plated steel
• Widely used for maintenance and OEM applications
• Suitable for low-pressure hydraulic use
• Can be used to clamp rubber hose, plastic tubing, rope, coaxial and electrical cable, and more
NOTE: Select nominal size nearest to, but always larger than, O.D. of material to be clamped after fitting has been inserted.
Reference No. is stamped on band of hose clamp.
Couldn't load pickup availability
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
Catalog page#: 22-2
Frequently Bought Together
Hose Clamp 301 SS 7/16 to 25-32"
Couldn't load pickup availability
Non-Perforated Clamp 316 SS #10 3/4 to 1-1/8"
Couldn't load pickup availability
Super 77 Hose Clamp SS 1-1/2 to 2-3/8"
Couldn't load pickup availability
Super 77 Miniature Hose Clamp SS 5/16 to 7/8"
Couldn't load pickup availability
Non-Perforated Clamp 316 SS #6 1/2 to 13/16"
Couldn't load pickup availability
Miniature Clamp SS 5/16 to 7/8"
Couldn't load pickup availability
Non-Perforated Clamp 316 SS #10 3/4 to 1-1/8"
Couldn't load pickup availability
Super 77 Hose Clamp SS 1-1/2 to 2-3/8"
Couldn't load pickup availability
Stainless Steel Air Brake Tube Insert 3/8"
Couldn't load pickup availability
Hose Clamp 301 SS 1-13/16 to 2-3/4"
Couldn't load pickup availability
DOT Swivel Elbow Male 360° Brass 3/8 x 1/4-18
Couldn't load pickup availability
Z Series Crimp-On Hose End 1/2 x 3/4-16"
Couldn't load pickup availability
Hex Nut Grade 8 Alloy Steel 1/2-13
Couldn't load pickup availability
SAE Flat Washer Thru-Hardened Steel 5/16"
Couldn't load pickup availability
USS Flat Washer Thru-Hardened Steel 5/16"
Couldn't load pickup availability
Product Description
• Medium-pressure clamp, installed on air, fluid, gas and steam lines• One-piece design offers a positive, tamper-proof seal without damaging the hose
• Assures adequate closure and compensates for tolerance variations in hose sizes
• Zinc-plated steel
• Widely used for maintenance and OEM applications
• Suitable for low-pressure hydraulic use
• Can be used to clamp rubber hose, plastic tubing, rope, coaxial and electrical cable, and more
NOTE: Select nominal size nearest to, but always larger than, O.D. of material to be clamped after fitting has been inserted.
Reference No. is stamped on band of hose clamp.
Technical Specifications
| Item#: | 96632 |
|---|---|
| Category | Two-Ear Hose Clamps |
| SAE Size | 11 |
| Material | Zinc Plated Steel |
| Size | 3/8 " |
| Minimum Diameter | .315 " |
| Maximum Diameter | .433 " |
| Width | 0.276 " |
| Thickness | 0.0394 " |
| Inner Width of Ear | 0.1770 " |
| UNSPSC #: | 31162906 |
| TAA Compliant: | Yes |
| Weight: | 0.16 lb |
Product Restrictions
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
