3/4X3-1/8 Drop In Expansion Anchor
(Pack of
5)
SKU:DY09620078 Item#: DY09620078
• An all-steel anchor
• Use with standard bolts for flush mount applications in concrete or masonry
• Designed to provide high holding strength with relatively shallow embedment depths
1. Drill hole 1/8" deeper than anchor length for flush mounting. Where surface deterioration is present, drill hole slightly deeper to permit anchor to be recessed.
2. Drop anchor into hole. If hole is slightly undersized, tap anchor with hammer until it bottoms in hole.
3. To set expander plug, installation tool can be struck a few sharp blows with a hammer, or an automatic air tool or electric tool can be used.
4. Place fixture in position, insert bolt and tighten.
Frequently Bought Together
Masonry Anchor TORX® Flat Head Steel 3/16 x 2-1/4"
Couldn't load pickup availability
Pin Drive Anchor Mushroom Head Nylon 1/4 x 3/4"
Couldn't load pickup availability
Wing-Type Toggle Bolt Anchor Steel #10-24 x 4"
Couldn't load pickup availability
Drop-In Anchor High Strength 5/16-18 x 2-7/16"
Couldn't load pickup availability
Drop-In Anchor High Strength 3/4-10 x 6-1/2"
Couldn't load pickup availability
5/8 Drop In Anchor
Couldn't load pickup availability
USS Flat Washer Thru-Hardened Steel 1/2"
Couldn't load pickup availability
Self-Drilling Screw Hex Head #12-14 x 1"
Couldn't load pickup availability
Hex Nut Grade 5 Steel 5/16-18
Couldn't load pickup availability
USS Flat Washer Thru-Hardened Steel 3/8"
Couldn't load pickup availability
Stepdown Butt Connector 16 to 14/12 to 10 AWG
Couldn't load pickup availability
Superbutt Connector 16 to 14 AWG Blue
Couldn't load pickup availability
Product Description
• An all-steel anchor• Use with standard bolts for flush mount applications in concrete or masonry
• Designed to provide high holding strength with relatively shallow embedment depths
1. Drill hole 1/8" deeper than anchor length for flush mounting. Where surface deterioration is present, drill hole slightly deeper to permit anchor to be recessed.
2. Drop anchor into hole. If hole is slightly undersized, tap anchor with hammer until it bottoms in hole.
3. To set expander plug, installation tool can be struck a few sharp blows with a hammer, or an automatic air tool or electric tool can be used.
4. Place fixture in position, insert bolt and tighten.
Technical Specifications
| Item#: | DY09620078 |
|---|---|
| Diameter | 3/4 " |
| Overall Length | 3-1/8 " |
| Thread Pitch | 10 tpi |
| Type | Expansion Drop-In Anchor |
| Drill Size | 1 " |
| Hole Depth | 3-1/4 " |
| Minimum Spacing | 12 " |
| Minimum Edge Distance | 10-1/2 " |
| Allowable Tension (4,000 psi Concrete) | 2,690 lb |
| Allowable Shear (4,000 psi Concrete) | 4,000 lb |
| UNSPSC #: | 31162101 |
| TAA Compliant: | No |
| Weight: | 2.4 lb |
Product Restrictions
