Drive Anchor Alloy Steel 1/4 x 3"
(Pack of
25)
• Made of high-strength heat-treated alloy steel with zinc plating
• Flat head style
• Works best when countersunk
• Same size hole diameter as anchor diameter
• Dead loads only
• Meets GSA Specification FF-325C, Group VI
1. Using 1/4" carbide bit, drill hole at least 1/4" deeper than anchor embedment. Clean hole of debris.
2. To set, drive anchor into hole through item to be fastened.
Frequently Bought Together
Masonry Anchor TORX® Head Steel 3/16 x 2-3/4"
Item#: 96923
Couldn't load pickup availability
Wedge Type Stud Bolt Anchor Steel 1/2 x 2-3/4"
Item#: 84031
Couldn't load pickup availability
Wedge Type Stud Bolt Anchor Steel 3/8 x 2-1/4"
Item#: 84028
Couldn't load pickup availability
Self-Drilling Screw Hex Head #12-14 x 1"
Item#: 2537
Couldn't load pickup availability
Flat Washer Grade 12 Thru-Hardened Steel M6
Item#: 87508
Couldn't load pickup availability
Hex Nut Grade 8 Steel 1/4-20
Item#: FA68400
Couldn't load pickup availability
Hex Nut Grade 5 Steel 3/8-16
Item#: FA95679
Couldn't load pickup availability
Self-Drilling Screw Hex Head #10-16 x 3/4"
Item#: 84931
Couldn't load pickup availability
Lock Washer Alloy Steel 3/8"
Item#: A530
Couldn't load pickup availability
Product Description
• Made of high-strength heat-treated alloy steel with zinc plating• Flat head style
• Works best when countersunk
• Same size hole diameter as anchor diameter
• Dead loads only
• Meets GSA Specification FF-325C, Group VI
1. Using 1/4" carbide bit, drill hole at least 1/4" deeper than anchor embedment. Clean hole of debris.
2. To set, drive anchor into hole through item to be fastened.
Technical Specifications
| Item#: | 64554 |
|---|---|
| Diameter | 1/4 " |
| Length | 3 " |
| Hole Diameter | 1/4 " |
| Type | Drive Anchors |
| Minimum Embedment | 1-1/8 " |
| Material | Steel |
| Ultimate Load In 3,000 PSI Concrerte | 2,010 lb |
| Finish | Zinc |
| UNSPSC #: | 31162101 |
| TAA Compliant: | Yes |
| Weight: | 1.1 lb |
Product Restrictions
