Forged Body Ball Valve Brass 1/4-18 x 1/4-18
(Pack of
1)
For use in gas and pneumatic lines, this Forged Body Ball Valve is ideal for high-pressure and high-temperature applications where reliability and safety are important. Made of brass with dual sealing system that allows valve to be operated in either direction making installation easier. Other advantages include no metal-to-metal moving parts, a handle clearly showing ball position and no maintenance requirements.
24-hour 100% seal test guaranteed
Working pressure: 600 PSI
Operating temperature: 40°F to +350°F
Chrome plated brass ball for longer life
Silicone-free lubricant on all seals
Approvals: CSA, FM, UL, CUL, Federal Specification WW-V-35C
Applications:
Gas
Pneumatic lines
Travel stops on body to avoid stresses at stem
Hot forged, sand blasted, unplated brass body and cap sealed with Loctite® or equivalent thread sealant
Finest brass according to EN 12165 and EN 12164 specifications
Full port to DIN 3357 for maximum flow
NPT taper ANSI B.1.20.1 female by female threads
Blowout-proof nickel plated brass stem
Two FPM O-rings at the stem for maximum safety
Geomet® carbon steel handle with thick PVC dip coating for thermal and electrical protection
Handle removable with valve in service
Pure PTFE self-lubricating seats with flexible-lip design
Frequently Bought Together

Pipe Hex Nipple Brass 1/2-14 x 1/2-14
Couldn't load pickup availability

Square Head Plug Brass 1/4-18 Male NPT
Couldn't load pickup availability

Compression Connector Brass 1/8-27 x 1/4"
Couldn't load pickup availability

DOT Connector Male Brass 3/16 x 1/8-27
Couldn't load pickup availability

DOT Connector Female Brass 3/8 x 1/8-27
Couldn't load pickup availability

Premium Greasing Accessory 11 Piece Kit
Couldn't load pickup availability

DOT Branch Tee Male Brass 1/2 x 1/2 x 3/8-18
Couldn't load pickup availability

DOT Connector Male Brass 3/16 x 1/8-27
Couldn't load pickup availability

DOT Connector Female Brass 3/8 x 1/8-27
Couldn't load pickup availability

Square Head Plug Steel Black 1/4-18
Couldn't load pickup availability

Pipe Nipple Steel Black 1/2-14 x 1/2-14
Couldn't load pickup availability

Merchant Coupling Steel 3/4-14 x 3/4-14
Couldn't load pickup availability

Non-Perforated Clamp 316 SS #6 1/2 to 13/16"
Couldn't load pickup availability

Miniature Clamp SS 5/16 to 7/8"
Couldn't load pickup availability

DOT Swivel Elbow Male 360° Brass 1/4 x 1/4-18
Couldn't load pickup availability

Flat Washer Grade 12 Thru-Hardened Steel M12
Couldn't load pickup availability

SAE Flat Washer Thru-Hardened Steel 3/8"
Couldn't load pickup availability

Flat Washer Grade 12 Thru-Hardened Steel M10
Couldn't load pickup availability

Cut Resistant 18-Gauge HPPE, ANSI A4 CUT LEVEL
Couldn't load pickup availability

MaxiFlex® Ultimate™ Seamless Knit Nylon/Elastane Glove with Nitrile Coated MicroFoam Grip
Couldn't load pickup availability

Made In USA Pipe Nipple Carbon Steel 1/2-14 x 1/2-14 - 2" Length
Couldn't load pickup availability
Product Description
For use in gas and pneumatic lines, this Forged Body Ball Valve is ideal for high-pressure and high-temperature applications where reliability and safety are important. Made of brass with dual sealing system that allows valve to be operated in either direction making installation easier. Other advantages include no metal-to-metal moving parts, a handle clearly showing ball position and no maintenance requirements. 24-hour 100% seal test guaranteed
Working pressure: 600 PSI
Operating temperature: 40°F to +350°F
Chrome plated brass ball for longer life
Silicone-free lubricant on all seals
Approvals: CSA, FM, UL, CUL, Federal Specification WW-V-35C
Applications:
Gas
Pneumatic lines
Travel stops on body to avoid stresses at stem
Hot forged, sand blasted, unplated brass body and cap sealed with Loctite® or equivalent thread sealant
Finest brass according to EN 12165 and EN 12164 specifications
Full port to DIN 3357 for maximum flow
NPT taper ANSI B.1.20.1 female by female threads
Blowout-proof nickel plated brass stem
Two FPM O-rings at the stem for maximum safety
Geomet® carbon steel handle with thick PVC dip coating for thermal and electrical protection
Handle removable with valve in service
Pure PTFE self-lubricating seats with flexible-lip design
Technical Specifications
Item#: | 63134 |
---|---|
Fitting Type | Ball Valve |
Configuration | Forged Body for Gas Lines |
Material | Brass |
Connection Type A x B | Female NPT x Female NPT |
Fitting Dimension A | 1/4-18 |
Fitting Dimension B | 1/4-18 |
Working Pressure | 600 PSI |
Temperature Range | -40 to 350 °F |
UNSPSC #: | 40170000 |
TAA Compliant: | No |
Weight: | 0.34 lb |
Product Restrictions
