Heat Shrink Tubing, 18 to 12 AWG, Black, 6" Length, 0.25" ID Before and 0.08" ID After Shrinkage, 2.5:1 Shrink Ratio
(Pack of
10)
SKU:51880 Item#: 51880
2.5:1 shrink ratio
Medium wall thickness fills the void between thin wall and heavy wall tubing
Outer wall of tubing is high grade polyolefin with an inner wall of adhesive sealant
Heat-activated sealant provides moisture-tight seal
6" lengths
Meets MIL-1-23053/4 Specification
Dielectric strength: 1,000V/mil
Low-temperature flexibility: Four hours at 67°F (55°C)
Maximum continuous operating temperature: 230°F (110°C)
Non-corrosive
Non-nutrient fungus resistant
Excellent fluid resistance
Rated at 600V
Tensile strength: 2,600 PSI
Elongation: 450%
Volume resistivity: 106 Ohm/cm
Heat shock: 168 hours at 482°F (250°C)
Longitudinal change: Less than 10%
Jacket is flame-retardant
Secant modulus: 16,000 PSI
Perfect for light-duty applications where heavy wall isn’t needed
Wire gauge coverage is approximate due to the wide variance of wire thicknesses.
Couldn't load pickup availability
Catalog page#: 17-33
Frequently Bought Together
Stepdown Butt Connector 24 to 22/22 to 18 AWG
Couldn't load pickup availability
MINI Fuse 30A Green
Couldn't load pickup availability
Super 33+ Series Vinyl Electrical Tape Black 3/4"
Couldn't load pickup availability
Tru-Shrink Heat Shrink Tubing 8 to 1 AWG Black
Couldn't load pickup availability
Female Quick Slide Terminal 16 to 14 AWG Blue
Couldn't load pickup availability
Tru-Shrink Heat Shrink Tubing 14 to 6 AWG Black
Couldn't load pickup availability
DOT Swivel Run Tee Male Brass 3/8 x 1/4-18 x 3/8"
Couldn't load pickup availability
DOT Connector Male Brass 5/8 x 3/8-18
Couldn't load pickup availability
DOT Branch Tee Male Brass 3/8 x 3/8 x 1/4-18
Couldn't load pickup availability
3/8 x 3'' Red Thermapod Sealflex Heat Shrink Tube
Couldn't load pickup availability
Heat Shrink Tubing Black 0.6 x 12"
Couldn't load pickup availability
Insulform Heat Shrink Tubing 16 to 14 AWG Black
Couldn't load pickup availability
Hex Nut Grade 5 Steel 3/8-16
Couldn't load pickup availability
SAE J995C Locknut with Nylon Insert Grade 8 5/8-11
Couldn't load pickup availability
Flat Washer Grade 12 Thru-Hardened Steel M12
Couldn't load pickup availability
DOT Union Brass 1/2 x 1/2"
Couldn't load pickup availability
High Solids Paints Semi-Gloss Black
Couldn't load pickup availability
Silicone Heater/Coolant Hose Clamp 9/16 to 1-1/16"
Couldn't load pickup availability
Split Wire Loom Polyethylene Black 0.35" ID 25'
Couldn't load pickup availability
Rubber Grommet 1/2" ID
Couldn't load pickup availability
Vinyl Electrical Tape Red 3/4" x 66'
Couldn't load pickup availability
Product Description
2.5:1 shrink ratio Medium wall thickness fills the void between thin wall and heavy wall tubing
Outer wall of tubing is high grade polyolefin with an inner wall of adhesive sealant
Heat-activated sealant provides moisture-tight seal
6" lengths
Meets MIL-1-23053/4 Specification
Dielectric strength: 1,000V/mil
Low-temperature flexibility: Four hours at 67°F (55°C)
Maximum continuous operating temperature: 230°F (110°C)
Non-corrosive
Non-nutrient fungus resistant
Excellent fluid resistance
Rated at 600V
Tensile strength: 2,600 PSI
Elongation: 450%
Volume resistivity: 106 Ohm/cm
Heat shock: 168 hours at 482°F (250°C)
Longitudinal change: Less than 10%
Jacket is flame-retardant
Secant modulus: 16,000 PSI
Perfect for light-duty applications where heavy wall isn’t needed
Wire gauge coverage is approximate due to the wide variance of wire thicknesses.
Technical Specifications
| Item#: | 51880 |
|---|---|
| Type | Pre-Cut |
| Style | Dual Wall |
| Wire Gauge Coverage | 18-12 AWG |
| Length | 6 " |
| Color | Black |
| I.D. Before Shrinkage | .250 " |
| I.D. After Shrinkage | .080 " |
| Shrink Ratio | 2.5 to 1 |
| Wall Thickness After Shrinkage | 0.047 " |
| Dielectric Strength | 1000 V/mm |
| Voltage Rating | 600 V |
| Elongation | 450 % |
| Tensile Strength | 2,600 PSI |
| Heat Shock | 168 hours at 482 degrees F |
| Secant Modulus | 16,000 PSI |
| Longitudinal Change | Less than 10% |
| Approvals | Meets MIL-1-23053/4 Specification |
| UNSPSC #: | 39121723 |
| TAA Compliant: | Yes |
| Weight: | 0.04 lb |
