Hollow Wall Screw Anchor, Steel, Zinc Finish, Extra Short Style, 5/16" Drill Size, #6-32
(Pack of
100)
Zinc rust-resistant finish
1. Drill hole recommended diameter. Push anchor into hole and tap until flush with wall surface.
2. Turn screw with screwdriver anchor will expand and hold firmly.
3. Remove screw, place fixture over anchor, place screw through fixture and anchor, tighten.
NOTE: Holding power is dependent on the strength of wall material.
Frequently Bought Together
Masonry Anchor Hex Washer Head Steel 3/16 x 1-3/4"
Couldn't load pickup availability
Wing Type Toggle Bolt Steel #10-24 x 3"
Couldn't load pickup availability
ALLIGATOR® Anchor Nylon #6 to #10
Couldn't load pickup availability
SAE Flat Washer Thru-Hardened Steel 5/16"
Couldn't load pickup availability
Hex Nut Grade 5 Steel 3/8-16
Couldn't load pickup availability
Hex Nut Grade 8 Alloy Steel 1/4-20
Couldn't load pickup availability
Butt Connector 22 to 18 AWG Red
Couldn't load pickup availability
Stepdown Butt Connector 22 to 18/16 to 14 AWG
Couldn't load pickup availability
Autobahn Ergo Magna EZ Crimper Ratcheting Terminal Crimper
Couldn't load pickup availability
Tamper-Proof Nail Drive Anchor Steel 1/4 x 2"
Couldn't load pickup availability
Pin Drive Anchor Mushroom Head Nylon 1/4 x 3/4"
Couldn't load pickup availability
Self-Drilling Standard Wall Anchor Nylon #6 to #10
Couldn't load pickup availability
Product Description
Zinc rust-resistant finish1. Drill hole recommended diameter. Push anchor into hole and tap until flush with wall surface.
2. Turn screw with screwdriver anchor will expand and hold firmly.
3. Remove screw, place fixture over anchor, place screw through fixture and anchor, tighten.
NOTE: Holding power is dependent on the strength of wall material.
Technical Specifications
| Item#: | 91612 |
|---|---|
| Type | Wall Anchor |
| Body Diameter | 7/32 " |
| Diameter | 1/8 " |
| Material | Steel |
| Screw Diameter | 6-32 (1/8) Extra Short |
| Finish | Zinc |
| Drill Size | 5/16 " |
| Minimum Wall Thickness | 0 " |
| Maximum Wall Thickness | 1/4 " |
| Screw Length | 1 " |
| Wall Thickness | 0 to 3/16 " |
| Sleeve Length | 11/64 " |
| UNSPSC #: | 31162103 |
| TAA Compliant: | No |
| Weight: | 0.91 lb |
Product Restrictions
