Hollow Wall Screw Anchor Steel Short Style #6-32
(Pack of
100.0)
• Zinc rust-resistant finish
1. Drill hole recommended diameter. Push anchor into hole and tap until flush with wall surface.
2. Turn screw with screwdriver – anchor will expand and hold firmly.
3. Remove screw, place fixture over anchor, place screw through fixture and anchor, tighten.
NOTE: Holding power is dependent on the strength of wall material.
Frequently Bought Together
Conical Screw Anchor Plastic #14 to #16 x 1-3/8"
Item#: 25193
Couldn't load pickup availability
SNAPTOGGLE® Toggle Bolt Anchor 1/4-20
Item#: 90918
Couldn't load pickup availability
Conical Screw Anchor Plastic #8 to #10 x 7/8"
Item#: 25191
Couldn't load pickup availability
SAE Flat Washer Thru-Hardened Steel 3/8"
Item#: 88437
Couldn't load pickup availability
SAE J995C Locknut with Nylon Insert Grade 8 1/4-20
Item#: 53979
Couldn't load pickup availability
IFI 100/107 Top Locknut Grade C 5/8-11
Item#: 80933
Couldn't load pickup availability
Nylon Cable Tie 11.75" Black
Item#: 94611
Couldn't load pickup availability
Nylon Cable Tie 15.5" Black
Item#: 94612
Couldn't load pickup availability
Butt Connector 16 to 14 AWG Clear
Item#: 1368141
Couldn't load pickup availability
Conical Screw Anchor Plastic #8 to #10 x 7/8"
Item#: 25191
Couldn't load pickup availability
Wing-Type Toggle Bolt Anchor Steel #10-24 x 3"
Item#: 25145
Couldn't load pickup availability
Wing-Type Toggle Bolt Anchor Steel #6-32 x 3"
Item#: 25141
Couldn't load pickup availability
Product Description
• Zinc rust-resistant finish1. Drill hole recommended diameter. Push anchor into hole and tap until flush with wall surface.
2. Turn screw with screwdriver – anchor will expand and hold firmly.
3. Remove screw, place fixture over anchor, place screw through fixture and anchor, tighten.
NOTE: Holding power is dependent on the strength of wall material.
Technical Specifications
| Item#: | 25170 |
|---|---|
| Length | 1-5/8 " |
| Type | Wall Anchor |
| Body Diameter | 7/32 " |
| Diameter | 1/8 " |
| Material | Steel |
| Screw Diameter | 6-32 (1/8) Short |
| Finish | Zinc |
| Drill Size | 5/16 " |
| Anchor Size | 1/8 x 1-5/8 " |
| Minimum Wall Thickness | 1/8 " |
| Maximum Wall Thickness | 1/2 " |
| Screw Length | 1-1/2 " |
| Wall Thickness | 1/8 to 5/8 " |
| Sleeve Length | 13/32 " |
| UNSPSC #: | 31162103 |
| TAA Compliant: | No |
| Weight: | 1.13 lb |
Product Restrictions
