Low Profile Portable Magnetic Drill, 1.6HP 120V/10A 1200W Single Phase Motor, 2" Depth of Cut, 2" Diameter
(Pack of 1)

Lawson Products

• Capacity: 2" x 2"
• Height (maximum): 7"
• Weight: 26 lbs.
• Magnet: 2,250 lbs.
• Incredible Capacity: The only low-profile drill on the market with this capacity (2" x 2")
• Reversible handle
NOTE: Magnet needs a minimum of 3/8" of material for the magnet to hold. Insufficient thickness will cause the magnet to lose hold and the system will not allow the motor to start.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.

Quantity

Catalog page#: 11-30

Frequently Bought Together

Annular Cutter Center Pin 7/16"

Annular Cutter Ejector Pin For 1" Cutting Depth Cutters

Item#: DY81860001

Annular Cutter Ejector Pin For 2" Cutting Depth Cutters

Item#: DY81860002

Jobber Length Drill Bit HSS 17/64"

Item#: 84734M06

Stemmed Crimped Wire Wheel 2"

Premium Grinding Wheel 4-1/2"

Large Portable Magnetic Drill 2"

Portable Magnetic Drill 1-1/2"

Superbutt Connector 22 to 18 AWG Red

SAE Flat Washer Thru-Hardened Steel 5/16"

Superbutt Connector 16 to 14 AWG Blue

Jobber Length Drill Bit HSS 1/8"

Item#: 84725M06

Twist-On Surface Conditioning Disc 2" Maroon

1/2" Cordless Hammer Drill Driver Charging Bundle

Item#: 1638994CB

Product Description

• Capacity: 2" x 2"
• Height (maximum): 7"
• Weight: 26 lbs.
• Magnet: 2,250 lbs.
• Incredible Capacity: The only low-profile drill on the market with this capacity (2" x 2")
• Reversible handle
NOTE: Magnet needs a minimum of 3/8" of material for the magnet to hold. Insufficient thickness will cause the magnet to lose hold and the system will not allow the motor to start.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.

Technical Specifications

Item#:	1574606
Height	7 "
Width	4 "
Length	13 "
Magnetic Dead Lift	2,250
Motor	1.6 hp 120V 10A 1200W (Single phase)
Arbor Bore	3/4 "
Cutter Diameter	2 "
Depth of Cut	2 "
Drill Point Breakaway	2250
Magnetic Base	"8" X "3-7/8"X"1.5"
Centerline Pilot to Motor Face	1-19/64 "
Centerline Pilot to Magnet Face	1-25/64 "
UNSPSC #:	23241801
TAA Compliant:	Yes

Suggested Products

Annular Cutter Center Pin 1/2 to 2-3/8"

Annular Cutter Center Pin 7/16"

CryoBore 11/16" Dia. Annular Cutter, 1-3/16" Cutting Depth

Item#: DY81863200

HSS Annular Cutter 1-1/2"

4PC Annular Cutter Set, 7/16", 1/2", 5/8", 3/4" With Pins In Pouch

Item#: PM08210500

CryoBore 1-1/2" Dia. Annular Cutter, 2-3/8" Cutting Depth

Item#: DY81874100

HSS Annular Cutter 1-3/4"

HSS Annular Cutter 1/2"

HSS Annular Cutter 1-7/8"

HSS Annular Cutter 1-5/16"

HSS Annular Cutter 2-1/16"

HSS Annular Cutter 1-1/16"

Your Recently Viewed Items