M3K Hydraulic Hose, Nitrile, 2-Wire Braided, 1" ID, 1.38" OD, 220' Length, 3,250 PSI Working Pressure
(Pack of
220)
SKU:1645165 Item#: 1645165
M3K is recommended for high-pressure hydraulic oil line applications. Easy to route and to install in extremely tight areas. Exceeds ISO 18752 Grade B, SAE 100R17 and ISO11237 R17 working pressure, minimum bend radius requirements and performance requirements of EN 857 1SC. Recommended Couplings: MegaCrimp™ Couplings, GlobalSpiral™ Couplings, Power Crimp™ Couplings (-3), Stainless Steel B Couplings.
• The optional MegaTuff™ cover lasts up to 300 times longer than standard hose during hose-to-hose and hose-to-metal abrasion tests per ISO 6945 and offers superior ozone and weathering resistance
• The optional XtraTuff™ cover lasts up to 25 times longer than standard hose
• For use with GlobalSpiral™ Couplings [G20 Series], MegaCrimp™ Couplings [G25 Series], Power Crimp™ Couplings, and Stainless Steel Braid Couplings [G17 Series]
• Tested to 600,000 impulse cycles, 3 times the industry standard
• M3K hose has smaller exterior dimensions and significantly tighter bend radius than SAE 100R1 and 100R2 hose and has greater flexibility for easier routing
• Compatible with biodegradable hydraulic fluids like polyolester, polyglycols and vegetable oils as well as petroleum-based fluids
• Meets Flame Resistance Acceptance Designation MSHA 2G
• Rated at 3250 psi working pressure
• With the Gates special MegaTuff™ cover which offers 300 times the abrasion resistance of the standard M3K cover as per ISO 6945, superior ozone and weathering resistance
• 70% of EN 857 1SC/2SC and 50% of EN 853 1SN/2SN bend radius at rated working pressure
• Mega3000 MegaTuff™ rated at 3250 PSI working pressure and 13,000 burst for all ID's
• Type approvals: DNV, GL, LR, BV and ABS
• Validated with MegaCrimp™
• Working pressure: 22.5 MPa
Temperature Range:
• -40°C to +100°C
• -40°F to +212°F
• Design factor: 4:1
• Size: 1/4" to 1"
Frequently Bought Together
Weatherhead H280 Hydraulic Hose Rubber 1.41" x 50'
Couldn't load pickup availability
Weatherhead H430 Hydraulic Hose 1-7/32" x 50'
Couldn't load pickup availability
SAE R16S Hydraulic Hose Rubber 0.81" x 250'
Couldn't load pickup availability
Z Series Crimp-On Hose End 1/2" x 1/2-14
Couldn't load pickup availability
Crimp-On Hose Coupling 1/2" x 7/8-14
Couldn't load pickup availability
Hydraulic Cap Nut, 9/16-18"(06) Female JIC SAE 37 Degree Flare
Couldn't load pickup availability
Ball Check Grease Fitting Straight
Couldn't load pickup availability
Hose Clamp 304 SS 1-5/16 to 2-1/4"
Couldn't load pickup availability
DOT Compression Connector Male Brass 3/8 x 1/4"
Couldn't load pickup availability
Weatherhead H280 Hydraulic Hose Rubber 1.41" x 50'
Couldn't load pickup availability
Weatherhead H430 Hydraulic Hose 1-7/32" x 50'
Couldn't load pickup availability
SAE R16S Hydraulic Hose Rubber 0.81" x 250'
Couldn't load pickup availability
SAE J995C Locknut with Nylon Insert Grade 8 3/8-16
Couldn't load pickup availability
SAE Flat Washer Thru-Hardened Steel 3/8"
Couldn't load pickup availability
USS Flat Washer Thru-Hardened Steel 1/4"
Couldn't load pickup availability
Product Description
M3K is recommended for high-pressure hydraulic oil line applications. Easy to route and to install in extremely tight areas. Exceeds ISO 18752 Grade B, SAE 100R17 and ISO11237 R17 working pressure, minimum bend radius requirements and performance requirements of EN 857 1SC. Recommended Couplings: MegaCrimp™ Couplings, GlobalSpiral™ Couplings, Power Crimp™ Couplings (-3), Stainless Steel B Couplings.• The optional MegaTuff™ cover lasts up to 300 times longer than standard hose during hose-to-hose and hose-to-metal abrasion tests per ISO 6945 and offers superior ozone and weathering resistance
• The optional XtraTuff™ cover lasts up to 25 times longer than standard hose
• For use with GlobalSpiral™ Couplings [G20 Series], MegaCrimp™ Couplings [G25 Series], Power Crimp™ Couplings, and Stainless Steel Braid Couplings [G17 Series]
• Tested to 600,000 impulse cycles, 3 times the industry standard
• M3K hose has smaller exterior dimensions and significantly tighter bend radius than SAE 100R1 and 100R2 hose and has greater flexibility for easier routing
• Compatible with biodegradable hydraulic fluids like polyolester, polyglycols and vegetable oils as well as petroleum-based fluids
• Meets Flame Resistance Acceptance Designation MSHA 2G
• Rated at 3250 psi working pressure
• With the Gates special MegaTuff™ cover which offers 300 times the abrasion resistance of the standard M3K cover as per ISO 6945, superior ozone and weathering resistance
• 70% of EN 857 1SC/2SC and 50% of EN 853 1SN/2SN bend radius at rated working pressure
• Mega3000 MegaTuff™ rated at 3250 PSI working pressure and 13,000 burst for all ID's
• Type approvals: DNV, GL, LR, BV and ABS
• Validated with MegaCrimp™
• Working pressure: 22.5 MPa
Temperature Range:
• -40°C to +100°C
• -40°F to +212°F
• Design factor: 4:1
• Size: 1/4" to 1"
Technical Specifications
| Item#: | 1645165 |
|---|---|
| Manufacturer Model #: | 12M3K-MTF XREEL |
| Industrial / Hydraulic | Hydraulic |
| Type | Rubber - Fabric Braid |
| Category / Performance | Medium Pressure |
| Industry Rating 1 | 100R17 |
| Manufacturer Series Number | 12M3K-MTF |
| Manufacturer Series Name | CR1 PRO |
| I.D. | 1 (-12) " |
| Hose I.D. | 1 " |
| Hose O.D. | 1.38 " |
| Working Pressure | 3,250 PSI |
| Burst Pressure | 13,000 PSI |
| Bend Radius | 3.8 " |
| Inner Tube Material | Nitrile |
| Hose Reinforcement | 1-braid, wire |
| Hose Cover Material | MegaTuff |
| Minimum Temperature | -40 °F |
| Maximum Temperature | 212 °F |
| Color | Black |
| Length | 220 ft |
| Dash Size | 12 |
| UNSPSC #: | 40142020 |
| TAA Compliant: | No |
