Home Anchors Masonry Anchor Hex Washer Head Steel 5/16 x 4"
Anchors
DV_ZoomOriginal_P_41606_WB.jpg
DV_ZoomOriginal_P_41606_TP1.jpg
DV_ZoomOriginal_P_41606_WB.jpg
DV_ZoomOriginal_P_41606_TP1.jpg

Masonry Anchor, Hex Washer Head, Steel, Stalgard Coated, 5/16 x 4"
(Pack of 50)

Item#: 60755

UltraCon®

UltraCon+® Anchors and Drill Bits
• Fast installation – drill hole, drive anchor
• Anchors available in three head styles: Slotted hex washer head for most applications; Phillips flat head provides flush seating for countersunk applications; 5/16" hex washer head has an oversized (0.540") washer face
• Replaces expansion anchors, plugs and screws
• Hi-Lo threads provide exceptional holding strength with no spalling
• Notched cutting edges for easy installation – cuts threads into poured concrete, brick or hollow block
• Gimlet point for self drilling into wood base material
• Reversible and removable
• Stalgard®-coated for superior corrosion resistance – withstands a minimum of 800 hours of neutral salt-spray testing without evidence of red rust on significant surfaces
• Carbide-Tipped UltraCon® Masonry Hammer Drill Bits are required – these bits are special size and tolerance products; use of any other bit will cause inconsistent performance of the anchor (sold separately)
5/16" dia. UltraCon® Anchors have a silver Stalgard® finish.
Hex washer head anchors have a large 5/8" washer dia.
UltraCon® and Stalgard® are registered trademarks of Acument Intellectual Properties, LLC.

Read More
Check Availability
Usually Ships: Today
While Supplies Last

Frequently Bought Together

DV_ZoomOriginal_I_97994_WB.jpg

Self-Drilling Standard Wall Anchor Nylon #6 to #10

Item#: 97994
DV_ZoomOriginal_P_615_WB.jpg

Wedge Type Stud Bolt Anchor Steel 3/8 x 3-3/4"

Item#: 84030
DV_ZoomOriginal_P_628.jpg

Masonry Anchor Hex Washer Head Steel 3/16 x 1-3/4"

Item#: 96907
DV_ZoomOriginal_P_33479.jpg

SAE J995C Locknut with Nylon Insert Grade 8 1/2-13

Item#: 53983
DV_ZoomOriginal_P_33479.jpg

Locknut with Nylon Insert Grade 8 5/16-18

Item#: 53980
DV_ZoomOriginal_P_2191.jpg

PTO Pin Lock 1/4 x 2-1/2"

Item#: 64348
DV_ZoomOriginal_P_41605.jpg

Masonry Anchor TORX® Flat Head Steel 3/16 x 2-1/4"

Item#: 96922
DV_ZoomOriginal_P_41605.jpg

Masonry Anchor TORX® Flat Head Steel 1/4 x 1-1/4"

Item#: 96927
DV_ZoomOriginal_P_628.jpg

Masonry Anchor Hex Washer Head Steel 1/4 x 1"

Item#: 64751
DV_ZoomOriginal_I_94610_WB.jpg

Nylon Cable Tie 4" Black

Item#: 94609
DV_ZoomOriginal_I_1639013.jpg

180-degree Wide Beam Head Light with Side Light

Item#: 1639013
DV_ZoomOriginal_P_31307.jpg

USS Flat Washer Thru-Hardened Steel 5/16"

Item#: 88446
DV_ZoomOriginal_I_1412524.jpg

Heavy-Duty Chain Lubricant 12oz

Item#: 1412524
DV_ZoomOriginal_I_DY80000351.jpg

Pneumatic Impact Wrench, 1/2 Drive Max Torque 730 lbs

Item#: DY80000351
DV_ZoomOriginal_I_FA5108.jpg

Screwdriver Master Bit Set, S2 Tool Steel, 100pc

Item#: FA5108
DV_ZoomOriginal_I_1412524.jpg

Heavy-Duty Chain Lubricant 12oz

Item#: 1412524
DV_ZoomOriginal_I_DY80000351.jpg

Pneumatic Impact Wrench, 1/2 Drive Max Torque 730 lbs

Item#: DY80000351
DV_ZoomOriginal_I_FA5108.jpg

Screwdriver Master Bit Set, S2 Tool Steel, 100pc

Item#: FA5108

Product Description

UltraCon+® Anchors and Drill Bits
• Fast installation – drill hole, drive anchor
• Anchors available in three head styles: Slotted hex washer head for most applications; Phillips flat head provides flush seating for countersunk applications; 5/16" hex washer head has an oversized (0.540") washer face
• Replaces expansion anchors, plugs and screws
• Hi-Lo threads provide exceptional holding strength with no spalling
• Notched cutting edges for easy installation – cuts threads into poured concrete, brick or hollow block
• Gimlet point for self drilling into wood base material
• Reversible and removable
• Stalgard®-coated for superior corrosion resistance – withstands a minimum of 800 hours of neutral salt-spray testing without evidence of red rust on significant surfaces
• Carbide-Tipped UltraCon® Masonry Hammer Drill Bits are required – these bits are special size and tolerance products; use of any other bit will cause inconsistent performance of the anchor (sold separately)
5/16" dia. UltraCon® Anchors have a silver Stalgard® finish.
Hex washer head anchors have a large 5/8" washer dia.
UltraCon® and Stalgard® are registered trademarks of Acument Intellectual Properties, LLC.

Technical Specifications

Item#: 60755
Diameter 5/16 "
Length 4 "
Type Screw Anchor
Material Carbon Steel
Finish Stalgard-Coated
For Material Thickness 2-1/2 - 3 "
Drill Bit Part Number 60766
Head Style Hex
Quantity Per Package 50.0000
UNSPSC #: 31162104
TAA Compliant: Yes
Weight: 3.01 lb

Suggested Products

DV_ZoomOriginal_P_627.jpg

Self-Drilling Wall Anchor 1-5/8"

Item#: 95096
DV_ZoomOriginal_P_2300_WB.jpg

SNAPTOGGLE® Toggle Bolt Anchor 1/4-20

Item#: 90918
DV_ZoomOriginal_P_628.jpg

Masonry Anchor Hex Washer Head Steel 1/4 x 1-1/4"

Item#: 96913
DV_ZoomOriginal_I_25192_WB.jpg

Conical Screw Anchor Plastic #10 to #12 x 1"

Item#: 25192
DV_ZoomOriginal_P_2300_WB.jpg

SNAPTOGGLE® Toggle Bolt Anchor 3/16-24

Item#: 90917
DV_ZoomOriginal_P_628.jpg

Masonry Anchor Hex Washer Head Steel 1/4 x 1-3/4"

Item#: 96914
DV_ZoomOriginal_I_25193_WB.jpg

Conical Screw Anchor Plastic #14 to #16 x 1-3/8"

Item#: 25193
DV_ZoomOriginal_I_25191_WB.jpg

Conical Screw Anchor Plastic #8 to #10 x 7/8"

Item#: 25191
DV_ZoomOriginal_P_627.jpg

Mini Self-Drilling Wall Anchor Steel 1-1/4"

Item#: 98669
DV_ZoomOriginal_P_628.jpg

Masonry Anchor Hex Washer Head Steel 3/16 x 1-1/4"

Item#: 96906
DV_ZoomOriginal_I_97994_WB.jpg

Self-Drilling Standard Wall Anchor Nylon #6 to #10

Item#: 97994
DV_ZoomOriginal_P_615_WB.jpg

Wedge Type Stud Bolt Anchor Steel 3/8 x 3-3/4"

Item#: 84030

Your Recently Viewed Items