Nylon Insert Flange Nut, Grade 8, Alloy Steel, Zinc Finish, Coarse Thread, 1-1/4" Across Flats, 0.825" Thickness, 3/4-10
(Pack of
5)
• Nylon insert has low coefficient of friction (will not damage bolt threads), high resilience, low chemical activity and relatively great hardness
• Locks uniformly over entire range of bolt thread tolerances and has low, even torque scatter, permitting repeated predictable tightening torques
• Grade G for use with Grade 8
• Solves the problem of an oversized hole and eliminates the need for a washer
• Non-serrated flange will not mar the surface
• Identified by six symmetrically spaced marks on the chamfered surface on the top of the nut or on the flange
Frequently Bought Together
Hex Nut Grade 8 Alloy Steel 5/8-11
Couldn't load pickup availability
Hex Nut Grade 5 Steel 1/4-20
Couldn't load pickup availability
USS Flat Washer Thru-Hardened Steel 1/2"
Couldn't load pickup availability
DIN 985 Locknut with Nylon Insert Grade 8 M12-1.75
Couldn't load pickup availability
DIN 985 Locknut with Nylon Insert Grade 8 M6-1
Couldn't load pickup availability
DIN 980V Top Locknut Grade 10 M16-2
Couldn't load pickup availability
SAE J995C Locknut with Nylon Insert Grade 8 3/4-10
Couldn't load pickup availability
Locknut with Nylon Insert Grade A 5/16-18
Couldn't load pickup availability
Hex Nut Grade 10 Alloy Steel M6-1
Couldn't load pickup availability
Superbutt Connector 22 to 18 AWG Red
Couldn't load pickup availability
Locknut with Nylon Insert Grade 8 5/16-18
Couldn't load pickup availability
SAE Flat Washer Thru-Hardened Steel 5/16"
Couldn't load pickup availability
Product Description
• Nylon insert has low coefficient of friction (will not damage bolt threads), high resilience, low chemical activity and relatively great hardness• Locks uniformly over entire range of bolt thread tolerances and has low, even torque scatter, permitting repeated predictable tightening torques
• Grade G for use with Grade 8
• Solves the problem of an oversized hole and eliminates the need for a washer
• Non-serrated flange will not mar the surface
• Identified by six symmetrically spaced marks on the chamfered surface on the top of the nut or on the flange
Technical Specifications
| Item#: | 18250 |
|---|---|
| Diameter | 3/4 " |
| Thread Pitch | 10 |
| Grade | 8 |
| Finish | Bright Zinc |
| Type | Flange Nuts |
| Material | Alloy Steel |
| Thickness | 0.825 " |
| Across Flats | 1-1/4 " |
| Thread | Coarse |
| Specifications | IFI 100/107 |
| Flange Diameter | 1.585 " |
| UNSPSC #: | 31161712 |
| TAA Compliant: | No |
| Weight: | 0.8 lb |
Product Restrictions
