SnapSkru® Self-Drilling Wall Anchor Kit, Nylon, #6 to #8 Screw Diameter, 100 Pieces
(Pack of
1)
18285 Contains:50 SnapSkru™ Mini Anchors (No. 18284) and 50 No. 6 x 1-1/4" Phillips Pan Head Sheet Metal Screws (No. 98385)
Anchor locks on wall; hear it pop and lock
Shock- and vibration-resistant
Installs with a screwdriver or screw gun; no pre-drilling necessary
Positive stop resists over-turning
Screw and fixture can be removed, leaving anchor in wall for reuse
Remove and reinstall anchor in same hole
For use in 3/8", 1/2" and 5/8" drywall applications
1. Press tip of SnapSkru™ anchor into drywall using a No. 2 Phillips screwdriver or screw gun. Drive anchor clockwise into drywall until anchor stops flush with wall.
2. Place item over anchor and insert screw.
3. Tighten screw flush with item. Screw pops open anchor, locking anchor to wall.
Couldn't load pickup availability
Catalog page#: 6-41
Frequently Bought Together
Drill 'N Drive Masonry Anchor Assortment 283Pcs
Couldn't load pickup availability
Standard Self-Drilling Wallboard Anchor Kit 41Pcs
Couldn't load pickup availability
Masonry Anchor Assortment 700Pcs
Couldn't load pickup availability
Masonry Anchor Hex Washer Head Steel 1/4 x 3-1/4"
Couldn't load pickup availability
Wedge Type Stud Bolt Anchor Steel 1/2 x 2-3/4"
Couldn't load pickup availability
Wedge Type Stud Bolt Anchor Steel 3/8 x 2-1/4"
Couldn't load pickup availability
Hex Nut Grade 8 Steel 5/8-11
Couldn't load pickup availability
Self-Drilling Screw Hex Head #12-14 x 3/4"
Couldn't load pickup availability
SAE Flat Washer Thru-Hardened Steel 1/2"
Couldn't load pickup availability
Flat Washer Grade 12 Thru-Hardened Steel M10
Couldn't load pickup availability
SAE Flat Washer Thru-Hardened Steel 3/8"
Couldn't load pickup availability
Hex Nut Grade 8 Alloy Steel 5/16-18
Couldn't load pickup availability
Product Description
18285 Contains:50 SnapSkru™ Mini Anchors (No. 18284) and 50 No. 6 x 1-1/4" Phillips Pan Head Sheet Metal Screws (No. 98385) Anchor locks on wall; hear it pop and lock
Shock- and vibration-resistant
Installs with a screwdriver or screw gun; no pre-drilling necessary
Positive stop resists over-turning
Screw and fixture can be removed, leaving anchor in wall for reuse
Remove and reinstall anchor in same hole
For use in 3/8", 1/2" and 5/8" drywall applications
1. Press tip of SnapSkru™ anchor into drywall using a No. 2 Phillips screwdriver or screw gun. Drive anchor clockwise into drywall until anchor stops flush with wall.
2. Place item over anchor and insert screw.
3. Tighten screw flush with item. Screw pops open anchor, locking anchor to wall.
Technical Specifications
| Item#: | 18285 |
|---|---|
| Type | Wall Anchors |
| Material | Nylon |
| UNSPSC #: | 31162103 |
| TAA Compliant: | No |
| Weight: | 0.61 lb |
