Solid Die Drill Bit Carbide 1/8"
(Pack of
1)
• Produces chips without generating excessive heat
• Accurately sized holes are produced without annealing or softening the workpiece
• Reamer-type finishes are easily produced
• Two straight flutes
• Made in USA
• Designed to drill hardened steel in the Rc 50 – 65 range
• Both a production drill and a salvage or reclaim tool
• Drill through glass, all series of stainless steel, nickel alloys, ceramics or weldments
• Drill out broken drills and taps
• Can be used in a drill press or portable power drill
NOTE: The drill is intended to be run at 60 – 100 SFM. Carbide drills are normally run at double the speed recommended for high-speed steel drills with a slightly lower feed rate. Proper drilling speed and the appropriate feed rate must be calculated for the material being drilled.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Frequently Bought Together
Drill Bit Carbide 7/32"
Couldn't load pickup availability
Drill Bit Carbide 5/32"
Couldn't load pickup availability
Drill Bit Carbide 3/16"
Couldn't load pickup availability
Stemmed Crimped Wire Wheel 2"
Couldn't load pickup availability
Premium Grinding Wheel 4-1/2"
Couldn't load pickup availability
Jobber Length Drill Bit HSS 25/64"
Couldn't load pickup availability
Jobber Length Drill Bit HSS 7/32"
Couldn't load pickup availability
Jobber Length Drill Bit HSS 11/64"
Couldn't load pickup availability
3/32" Fractional Drill Bit, Jobber Length, No Flats
Couldn't load pickup availability
Utility Knife, Folding , 4" Closed
Couldn't load pickup availability
Locknut with Nylon Insert Grade 8 5/16-18
Couldn't load pickup availability
Hex Nut Grade 8 Alloy Steel 1/4-20
Couldn't load pickup availability
Jobber Length Drill Bit HSS 1/8"
Couldn't load pickup availability
7" Straight Jaw Locking Pliers
Couldn't load pickup availability
Twist-On Surface Conditioning Disc 2" Maroon
Couldn't load pickup availability
Product Description
• Produces chips without generating excessive heat• Accurately sized holes are produced without annealing or softening the workpiece
• Reamer-type finishes are easily produced
• Two straight flutes
• Made in USA
• Designed to drill hardened steel in the Rc 50 – 65 range
• Both a production drill and a salvage or reclaim tool
• Drill through glass, all series of stainless steel, nickel alloys, ceramics or weldments
• Drill out broken drills and taps
• Can be used in a drill press or portable power drill
NOTE: The drill is intended to be run at 60 – 100 SFM. Carbide drills are normally run at double the speed recommended for high-speed steel drills with a slightly lower feed rate. Proper drilling speed and the appropriate feed rate must be calculated for the material being drilled.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Technical Specifications
| Item#: | 56262 |
|---|---|
| Drill Type | Fractional |
| Type | Drill Bit |
| Material | Carbide |
| Finish | Bright |
| Diameter | 1/8 " |
| Decimal Equivalent | 0.1250 " |
| Flutes | 2 |
| Flute Length | 5/8 " |
| Shank | Straight |
| Material Thickness | 9/16 " |
| Overall Length | 1-1/2 " |
| SAE Code | TD7DSX 0.1250 S1Z33 / 00.63 - 01.50 |
| UNSPSC #: | 23241605 |
| TAA Compliant: | Yes |
| Weight: | 0.01 lb |
Product Restrictions
