Top Locknut Grade C 3/4-10
(Pack of
25)
Heat-treated for matched strength
Will not loosen even under severe vibration
Locking torque is retained for a minimum of five reapplications
150,000 PSI minimum proof strength
Meets IFI and ANSI specifications
Developed for Grade 8 applications
Designed for use with Tuff-Torq® Cap Screws
Identified by six symmetrically spaced marks on the chamfered surface on the top of the nut
NOTE: Not recommended for use above 450°F (232°C).
For recommended torque values, see Lawson’s E546 brochure.
Couldn't load pickup availability
Frequently Bought Together

Flat Washer Grade 12 Thru-Hardened Steel M10
Couldn't load pickup availability

SAE Flat Washer Thru-Hardened Steel 5/8"
Couldn't load pickup availability

Hex Nut Grade 8 Alloy Steel 5/16-18
Couldn't load pickup availability

DIN 980V Top Locknut Grade 10 M6-1
Couldn't load pickup availability

SAE J995C Locknut with Nylon Insert Grade 8 1-8
Couldn't load pickup availability

DIN 980V Top Locknut Grade 10 M12-1.75
Couldn't load pickup availability

Hex Nut Grade 8 Steel 3/4-10
Couldn't load pickup availability

SAE J995C Locknut with Nylon Insert Grade A 3/8-16
Couldn't load pickup availability

Locknut with Nylon Insert Grade 8 7/16-14
Couldn't load pickup availability

Utility Knife, Folding , 4" Closed
Couldn't load pickup availability

SAE Flat Washer Thru-Hardened Steel 1/4"
Couldn't load pickup availability

Hex Nut Grade 8 Alloy Steel 1/2-13
Couldn't load pickup availability

Plow Bolt High Strength A9 5/8-11 x 2"
Couldn't load pickup availability

Plow Bolt Grade 8 5/8-11 x 2-1/2"
Couldn't load pickup availability

Plow Bolt High Strength A9 5/8-11 x 2-1/4"
Couldn't load pickup availability
Product Description
Heat-treated for matched strength Will not loosen even under severe vibration
Locking torque is retained for a minimum of five reapplications
150,000 PSI minimum proof strength
Meets IFI and ANSI specifications
Developed for Grade 8 applications
Designed for use with Tuff-Torq® Cap Screws
Identified by six symmetrically spaced marks on the chamfered surface on the top of the nut
NOTE: Not recommended for use above 450°F (232°C).
For recommended torque values, see Lawson’s E546 brochure.
Technical Specifications
Item#: | 80934 |
---|---|
Diameter | 3/4 " |
Thread Pitch | 10 |
Grade | C |
Finish | Zinc/Wax |
Type | Top Lock Nut |
Material | Alloy Steel |
Thickness | 0.827 " |
Across Flats | 1-1/8 " |
Thread | Coarse |
Size | 3/4-10 |
Specifications | IFI 100/107 |
Maximum Temperature | 450º F |
Proof | 150,000 PSI |
UNSPSC #: | 31161716 |
TAA Compliant: | No |
Weight: | 2.72 lb |
Product Restrictions
