Turnbuckle, Hook and Eye, Galvanized, 1/2" x 6"
(Pack of
1.0)
Turnbuckles can be used to apply tension to wire rope or cable
Composed of a forged body and two end fittings
Must only be applied to loads within their working load limit
Apply turnbuckles in a straight in-line manner only. Do not allow anything to contact the turnbuckle body or end attachment threaded shanks
Working load limits are based on a safety factor of 5 to 1
Meets ASTM F1145 Type 1, Grade 1, Class F
Apply load to the center of end attachment eyes and bowl of hooks. Do not tip load hooks or side load eyes
CAUTION: Do not exceed working load limits.
Frequently Bought Together

Quick Link 1/2" Chain Size 3300 Lb Safe Load
Couldn't load pickup availability

Hook Ceiling Trade Size 4
Couldn't load pickup availability

Screw Pin Anchor Shackle, 5/16", 2,000 lb WLL
Couldn't load pickup availability

AkroBin® Divider for 30230,30235, 30255
Couldn't load pickup availability

Clevis Slip Hook, Grade 70, 3/8", 6,600 lb WLL
Couldn't load pickup availability

Tarp Strap Epdm Rubber with Hooks 19" Long
Couldn't load pickup availability

Lawson Open & Shut Nut & Bolt Loosener, Rust Penetrant, SKU DA6152, 20 oz Aerosol Can
Couldn't load pickup availability

IFI 100/107 Top Locknut Grade C 5/8-11
Couldn't load pickup availability

SAE J995C Locknut with Nylon Insert Grade 8 3/8-16
Couldn't load pickup availability

Turnbuckle, Stainless Steel, Hook and Hook, 1/4" x 3" Take Up
Couldn't load pickup availability

Turnbuckle, Hook and Eye, Galvanized, 1/4" x 4"
Couldn't load pickup availability

Turnbuckle, Jaw and Jaw, Galvanized, 1/2" x 9"
Couldn't load pickup availability
Product Description
Turnbuckles can be used to apply tension to wire rope or cable Composed of a forged body and two end fittings
Must only be applied to loads within their working load limit
Apply turnbuckles in a straight in-line manner only. Do not allow anything to contact the turnbuckle body or end attachment threaded shanks
Working load limits are based on a safety factor of 5 to 1
Meets ASTM F1145 Type 1, Grade 1, Class F
Apply load to the center of end attachment eyes and bowl of hooks. Do not tip load hooks or side load eyes
CAUTION: Do not exceed working load limits.
Technical Specifications
Item#: | 1442154 |
---|---|
Type | Hook and Eye |
Diameter | 1/2 " |
Closed Length | 13-5/8 " |
Working Load Limit | 1,500 lb |
Material | Forged Steel |
Finish | Galvanized |
UNSPSC #: | 24101611 |
TAA Compliant: | Yes |
Weight: | 1.67 lb |
Product Restrictions


