Turnbuckle, Jaw and Jaw, Galvanized, 1/2" x 2"
(Pack of
1)
SKU:1442063 Item#: 1442063
• Turnbuckles can be used to apply tension to wire rope or cable
• Composed of a forged body and two end fittings
• Must only be applied to loads within their working load limit
• Apply turnbuckles in a straight in-line manner only. Do not allow anything to contact the turnbuckle body or end attachment threaded shanks
• Working load limits are based on a safety factor of 5 to 1
• Meets ASTM F1145 Type 1, Grade 1, Class G
CAUTION: Do not exceed working load limits.
Frequently Bought Together
Swivel Eye Bolt Snap, 5/8" Eye Size, 4-1/4" Length, Zinc Finish
Couldn't load pickup availability
Oversize Screw Pin Anchor Shackle, Stainless Steel, 1/4", 1,000 lb WLL
Couldn't load pickup availability
Oversize Screw Pin Anchor Shackle, Stainless Steel, 3/8", 1,500 lb WLL
Couldn't load pickup availability
Wire Rope Sleeve, 3/32", Aluminum
Couldn't load pickup availability
Grade 43 Clevis Grab Hook, 3/8", 5,400 lb WLL
Couldn't load pickup availability
Wire Rope Clip, Malleable, Galvanized, 3/8"
Couldn't load pickup availability
SAE Flat Washer Thru-Hardened Steel 3/8"
Couldn't load pickup availability
Nutsetter & Bit Set, Magnetic, 22pc
Couldn't load pickup availability
Hex Nut Grade 8 Alloy Steel 5/16-18
Couldn't load pickup availability
Turnbuckle, Jaw and Jaw, Galvanized, 1/2" x 12"
Couldn't load pickup availability
Turnbuckle, Jaw and Jaw, Galvanized, 3/8" x 6"
Couldn't load pickup availability
Turnbuckle, Jaw and Jaw, Galvanized, 5/8" x 12"
Couldn't load pickup availability
Product Description
• Turnbuckles can be used to apply tension to wire rope or cable• Composed of a forged body and two end fittings
• Must only be applied to loads within their working load limit
• Apply turnbuckles in a straight in-line manner only. Do not allow anything to contact the turnbuckle body or end attachment threaded shanks
• Working load limits are based on a safety factor of 5 to 1
• Meets ASTM F1145 Type 1, Grade 1, Class G
CAUTION: Do not exceed working load limits.
Technical Specifications
| Item#: | 1442063 |
|---|---|
| Type | Jaw and Jaw |
| Diameter | 1/2 " |
| Closed Length | 8-7/8 " |
| Working Load Limit | 2,200 lb |
| Material | Forged Steel |
| Finish | Galvanized |
| UNSPSC #: | 24101611 |
| TAA Compliant: | Yes |
Product Restrictions
