Wedge Type Anchor Bolt Steel 3/8 x 2-3/4"
(Pack of
25.0)
• Zinc-plated, rust-resistant steel
• Meets the following specifications: OSHA Section 1910.212 (b), I.C.B.O. No. 1821, GSA FFS-325 and ASTM B633
• Designed for installation in concrete block, brick and stone
1. Drill hole to depth equal to length of Wej-It® Anchor Bolt. Clean hole with compressed air and wire brush.
2. Drive Wej-It® Anchor Bolt into drilled hole through fixture until washer is flush with fixture.
3. Tighten the nut three to five turns past the hand-tight position.
Frequently Bought Together
SNAPTOGGLE® Toggle Bolt Anchor 3/8-16
Item#: 90919
Couldn't load pickup availability
Hex Cap Screw Grade 8 1/4-20 x 1"
Item#: FA68002
Couldn't load pickup availability
Flat Washer Grade 12 Thru-Hardened Steel M10
Item#: 87511
Couldn't load pickup availability
Wedge Type Stud Bolt Anchor Steel 1/2 x 5-1/2"
Item#: 84033
Couldn't load pickup availability
Wedge Type Stud Bolt Anchor Steel 1/4 x 2-1/4"
Item#: 84026
Couldn't load pickup availability
Wedge Type Stud Bolt Anchor Steel 1/2 x 7"
Item#: 91606
Couldn't load pickup availability
Product Description
• Zinc-plated, rust-resistant steel• Meets the following specifications: OSHA Section 1910.212 (b), I.C.B.O. No. 1821, GSA FFS-325 and ASTM B633
• Designed for installation in concrete block, brick and stone
1. Drill hole to depth equal to length of Wej-It® Anchor Bolt. Clean hole with compressed air and wire brush.
2. Drive Wej-It® Anchor Bolt into drilled hole through fixture until washer is flush with fixture.
3. Tighten the nut three to five turns past the hand-tight position.
Technical Specifications
| Item#: | 92856 |
|---|---|
| Diameter | 3/8 " |
| Length | 2-3/4 " |
| Thread Length | 7/8 " |
| Drill Size | 3/8 " |
| Material | Carbon Steel |
| Finish | Bright Zinc |
| Type | Wedge Anchor |
| Size | 3/8X2-3/4 " |
| Minimum Embedment | 1-1/2 " |
| UNSPSC #: | 31162101 |
| TAA Compliant: | No |
| Weight: | 2.45 lb |
Product Restrictions
