Wedge Type Anchor Bolt Steel 3/8 x 2"
(Pack of
25)
Zinc-plated, rust-resistant steel
Meets the following specifications: OSHA Section 1910.212 (b), I.C.B.O. No. 1821, GSA FFS-325 and ASTM B633
Designed for installation in concrete block, brick and stone
1. Drill hole to depth equal to length of Wej-It® Anchor Bolt. Clean hole with compressed air and wire brush.
2. Drive Wej-It® Anchor Bolt into drilled hole through fixture until washer is flush with fixture.
3. Tighten the nut three to five turns past the hand-tight position.
Frequently Bought Together

Masonry Anchor Hex Washer Head Steel 1/4 x 2-1/4"
Couldn't load pickup availability

Wing Type Toggle Bolt Steel #10-24 x 3"
Couldn't load pickup availability

Wing-Type Toggle Bolt Anchor Steel #6-32 x 2"
Couldn't load pickup availability

Hex Nut Grade 5 Steel 3/8-16
Couldn't load pickup availability

SAE J995C Locknut with Nylon Insert Grade 8 1/2-13
Couldn't load pickup availability

Self-Drilling Screw Hex Head #10-16 x 3/4"
Couldn't load pickup availability

Stepdown Butt Connector 22 to 18/16 to 14 AWG
Couldn't load pickup availability

SAE J995C Locknut with Nylon Insert Grade 8 1/4-20
Couldn't load pickup availability

SAE Flat Washer Thru-Hardened Steel 3/8"
Couldn't load pickup availability

Wedge Type Stud Bolt Anchor SS 3/8 x 5"
Couldn't load pickup availability

Wedge Type Stud Bolt Anchor SS 1/4 x 1-3/4"
Couldn't load pickup availability

Wedge Type Stud Bolt Anchor Steel 5/8 x 6"
Couldn't load pickup availability
Product Description
Zinc-plated, rust-resistant steel Meets the following specifications: OSHA Section 1910.212 (b), I.C.B.O. No. 1821, GSA FFS-325 and ASTM B633
Designed for installation in concrete block, brick and stone
1. Drill hole to depth equal to length of Wej-It® Anchor Bolt. Clean hole with compressed air and wire brush.
2. Drive Wej-It® Anchor Bolt into drilled hole through fixture until washer is flush with fixture.
3. Tighten the nut three to five turns past the hand-tight position.
Technical Specifications
Item#: | 92855 |
---|---|
Diameter | 3/8 " |
Length | 2 " |
Thread Length | 7/8 " |
Drill Size | 3/8 " |
Material | Carbon Steel |
Finish | Bright Zinc |
Type | Wedge Anchor |
Size | 3/8X2 " |
Minimum Embedment | 1-1/2 " |
UNSPSC #: | 31162101 |
TAA Compliant: | No |
Weight: | 1.88 lb |
Product Restrictions
