Black Gold® Fuel Tleyle, Nitrile - Type C Tube intérieur, renforcement de filament statique textile synthétique multi-plis, noir, 300 psi, 2 "ID, 100 '
(Paquet de
400)
SKU:1646898 Article#: 1646898
Transfer of refined fuels (commercial gasoline and diesel fuel) oils and other petroleum products. Ideal for offshore/onshore transfer applications involving suction and discharge service for diesel oils and other similar petroleum products where an extremely lightweight, hardwall, flexible hose with a high rated working pressure and a small minimum bend radius is required. Transfer of water, petroleum–based fluids, dilute acids, chemicals and abrasive slurries used in oil and gas well stimulation and fracking.
• CAUTION: For Bio–Diesel and other alternative fuel applications, see Fuel Master™ XTreme™. Petroleum transfer hoses may be used with all grades of Bio–Diesel only if the exposure is intermittent and the hose is drained between uses. Transfer hoses are designed for intermittent contact with refined fuels and must be drained after use. Do not convey fuels over +120°F (+49°C)
• ARPM (Class A) High oil–resistant tube
Impossible de charger la disponibilité du service de retrait
Fréquemment achetés ensemble
Fuel Master® Xtreme ™ 150SD tuyau ondulé 3 "x 200 'noir
Impossible de charger la disponibilité du service de retrait
Fuel Master® PVC Vapeur de vapeur de vapeur 3 "x 100 'Clear
Impossible de charger la disponibilité du service de retrait
Fuel Master® Xtreme ™ 150SD tuyau ondulé 2-1 / 2 "x 100 'rouge
Impossible de charger la disponibilité du service de retrait
Pince de tuyau de chauffage en silicone / liquide de refroidissement 9/16 à 1-1 / 16 "
Impossible de charger la disponibilité du service de retrait
Connecteur de points Mâle mâle 1/4 x 1 / 4-18
Impossible de charger la disponibilité du service de retrait
Couplage de tuyau en laiton 3/8-18 x 3/8-18
Impossible de charger la disponibilité du service de retrait
Connecteur à bout de 22 à 18 AWG rouge
Impossible de charger la disponibilité du service de retrait
SAE FLAT RONDEUR À travers l'acier durci 3/8 "
Impossible de charger la disponibilité du service de retrait
Lawson Open & Shut Nut & Bolt Bolt, Rust Petrant, SKU DA6152, 20 oz Aerosol Can
Impossible de charger la disponibilité du service de retrait
Barricade ™ en carburateur de carburant du moteur 5/16 "x 550 'noir
Impossible de charger la disponibilité du service de retrait
Huiles et tuyaux laitiers de la nourriture maître 2 "x 100 'gris
Impossible de charger la disponibilité du service de retrait
H961008GY-350R
Impossible de charger la disponibilité du service de retrait
Raccord de remplacement P / U tuyau d'auto-objet 3/8 "
Impossible de charger la disponibilité du service de retrait
H0105 BOSFLEX AIR ET TUYAU D'EAU 1/2 "ROUGE
Impossible de charger la disponibilité du service de retrait
H285 Clearforce-R Food Transfert de tuyau 1/4 "Clear
Impossible de charger la disponibilité du service de retrait
Description du produit
Transfer of refined fuels (commercial gasoline and diesel fuel) oils and other petroleum products. Ideal for offshore/onshore transfer applications involving suction and discharge service for diesel oils and other similar petroleum products where an extremely lightweight, hardwall, flexible hose with a high rated working pressure and a small minimum bend radius is required. Transfer of water, petroleum–based fluids, dilute acids, chemicals and abrasive slurries used in oil and gas well stimulation and fracking.• CAUTION: For Bio–Diesel and other alternative fuel applications, see Fuel Master™ XTreme™. Petroleum transfer hoses may be used with all grades of Bio–Diesel only if the exposure is intermittent and the hose is drained between uses. Transfer hoses are designed for intermittent contact with refined fuels and must be drained after use. Do not convey fuels over +120°F (+49°C)
• ARPM (Class A) High oil–resistant tube
Spécifications techniques
| Article#: | 1646898 |
|---|---|
| Taper | Pétrole - tuyau de distribution standard |
| Nom de la série du fabricant | Black Gold® Fuel 300D |
| IDENTIFIANT. | 2" |
| Pression de travail | 300 psi |
| Rayon de courbure minimum | 14.0 " |
| Matériau de tube intérieur | Nitrile - Type C |
| Renforcement du tuyau | Multi-pli, textile synthétique, filament statique |
| Matériau de couverture de tuyau | Chloroprène - Type A |
| Température | -40 à +180 ° F |
| Couleur | Noir |
| Longueur | 100 pieds |
| UNSPSC #: | 40142014 |
| Conforme à la TAA : | Oui |
