Black Gold® Oilfield Service tuyau, nitrile - Type C Tube intérieur, renforcement de filament statique textile synthétique multi-plis, noir, 400 psi, 3 "ID, 100 '
(Paquet de
400)
SKU:1646919 Article#: 1646919
Transfer of water, petroleum–based fluids, dilute acids, chemicals and abrasive slurries used in oil and gas well stimulation and fracking. Transfer of refined fuels (commercial gasoline, diesel fuel) oils and other petroleum products. Transfer hoses are designed for intermittent contact with refined fuels and must be drained after use. Ideal for offshore/onshore dock hose transfer applications involving discharge service for diesel oils and other similar petroleum products where an extremely lightweight, flexible hose with a high rated working pressure and a small minimum bend radius is required. For Bio–Diesel and other alternative fuel applications, see Fuel Master™ XTreme™. Petroleum transfer hoses may be used with all grades of Bio–Diesel only if the exposure is intermittent and the hose is drained between uses.
• CAUTION: Do not convey fuels over +120°F (+49°C)
• Service life of transfer hoses can be extended by draining hoses after use
• ARPM (Class A) High oil–resistant tube
Impossible de charger la disponibilité du service de retrait
Fréquemment achetés ensemble
Fuel Master® 150d Tyr 2 "x 100 'noir
Impossible de charger la disponibilité du service de retrait
Fuel Master® 150SD LT MEGAFLEX TUYAUX 2-1 / 2 "x 100 'noir
Impossible de charger la disponibilité du service de retrait
Fuel Master® Xtreme ™ 150SD tuyau ondulé 2 "x 200 'noir
Impossible de charger la disponibilité du service de retrait
Couplage de tuyau en laiton 3/8-18 x 3/8-18
Impossible de charger la disponibilité du service de retrait
Dot Compression Union laiton 1/4 "
Impossible de charger la disponibilité du service de retrait
Nylon mâle du coude à points 3/8 x 1 / 4-18
Impossible de charger la disponibilité du service de retrait
USS Flat Washer Thru-Harded Steel 3/8 "
Impossible de charger la disponibilité du service de retrait
Lock POP PIN 1/4 x 2-1 / 2 "
Impossible de charger la disponibilité du service de retrait
SAE FLAT WASHER À travers l'acier durci 5/16 "
Impossible de charger la disponibilité du service de retrait
Fuel Master ™ LP 350 tuyau 1/4 "x 700 'noir
Impossible de charger la disponibilité du service de retrait
Aggie Gas Petroleum Standard Dispensing tuyau 3/4 "
Impossible de charger la disponibilité du service de retrait
Fuel Master ™ LP 350 tuyau 1/4 "x 3700 'noir
Impossible de charger la disponibilité du service de retrait
Air / tuyau en caoutchouc polyvalent 1/4 "noir
Impossible de charger la disponibilité du service de retrait
H0105 Bosflex Air and Water tuyau 3/8 "rouge
Impossible de charger la disponibilité du service de retrait
Flexair 1/2 "i.d. x 50 'tuyau d'air
Impossible de charger la disponibilité du service de retrait
Description du produit
Transfer of water, petroleum–based fluids, dilute acids, chemicals and abrasive slurries used in oil and gas well stimulation and fracking. Transfer of refined fuels (commercial gasoline, diesel fuel) oils and other petroleum products. Transfer hoses are designed for intermittent contact with refined fuels and must be drained after use. Ideal for offshore/onshore dock hose transfer applications involving discharge service for diesel oils and other similar petroleum products where an extremely lightweight, flexible hose with a high rated working pressure and a small minimum bend radius is required. For Bio–Diesel and other alternative fuel applications, see Fuel Master™ XTreme™. Petroleum transfer hoses may be used with all grades of Bio–Diesel only if the exposure is intermittent and the hose is drained between uses.• CAUTION: Do not convey fuels over +120°F (+49°C)
• Service life of transfer hoses can be extended by draining hoses after use
• ARPM (Class A) High oil–resistant tube
Spécifications techniques
| Article#: | 1646919 |
|---|---|
| Taper | Pétrole - tuyau de distribution standard |
| Nom de la série du fabricant | Service de champ pétrolier Black Gold® |
| IDENTIFIANT. | 3" |
| Pression de travail | 400 psi |
| Matériau de tube intérieur | Nitrile - Type C |
| Renforcement du tuyau | Multi-pli, textile synthétique, filament statique |
| Matériau de couverture de tuyau | Nitrile carboxylé - Type C4 |
| Température | -40 à +180 ° F |
| Couleur | Noir |
| Longueur | 100 pieds |
| UNSPSC #: | 40142014 |
| Conforme à la TAA : | Oui |
