Black Gold® Oilfield Service tuyau, Nitrile - Type C Tube intérieur, Textile synthétique multi-PLY Double fil Hélice, noir, 400 psi, 4 "ID, 200 '
(Paquet de
200)
SKU:1646963 Article#: 1646963
Transfer of water, petroleum–based fluids, dilute acids, chemicals and abrasive slurries used in oil and gas well stimulation and fracking. Transfer of refined fuels (commercial gasoline, diesel fuel) oils and other petroleum products. Transfer hoses are designed for intermittent contact with refined fuels and must be drained after use. Ideal for offshore/onshore dock hose transfer applications involving discharge service for diesel oils and other similar petroleum products where an extremely lightweight, flexible hose with a high rated working pressure and a small minimum bend radius is required. For Bio–Diesel and other alternative fuel applications, see Fuel Master™ XTreme™. Petroleum transfer hoses may be used with all grades of Bio–Diesel only if the exposure is intermittent and the hose is drained between uses.
• CAUTION: Do not convey fuels over +120°F (+49°C)
• Service life of transfer hoses can be extended by draining hoses after use
• ARPM (Class A) High oil–resistant tube
Impossible de charger la disponibilité du service de retrait
Fréquemment achetés ensemble
Fuel Master ™ LPG Vapeur de vapeur 3/16 "x 700 'noir
Impossible de charger la disponibilité du service de retrait
Fuel Master ™ LP 350 tuyau 3/4 "x 100 'noir
Impossible de charger la disponibilité du service de retrait
Fuel Master® Xtreme ™ 150SD tuyau ondulé 2 "x 200 'noir
Impossible de charger la disponibilité du service de retrait
Ball Check Grease ajustement droit
Impossible de charger la disponibilité du service de retrait
Clamp de tuyau 301 SS 1-5 / 16 à 2-1 / 4 "
Impossible de charger la disponibilité du service de retrait
Connecteur de compression de points Male en laiton 3/8 x 1/4 "
Impossible de charger la disponibilité du service de retrait
Lawson Open & Shut Nut & Bolt Bolt, Rust Petrant, SKU DA6152, 20 oz Aerosol Can
Impossible de charger la disponibilité du service de retrait
SAE FLAT RONDEUR À travers l'acier durci 3/8 "
Impossible de charger la disponibilité du service de retrait
USS Flat Renseur à travers l'acier durci 1/4 "
Impossible de charger la disponibilité du service de retrait
Barricade ™ en carburateur de carburant du moteur 5/16 "x 550 'noir
Impossible de charger la disponibilité du service de retrait
Huiles et tuyaux laitiers de la nourriture maître 2 "x 100 'gris
Impossible de charger la disponibilité du service de retrait
H961008GY-350R
Impossible de charger la disponibilité du service de retrait
Avagard PU Recoil Air Tymage Assembly 3/8 "x 25 '
Impossible de charger la disponibilité du service de retrait
Flexair 1/2 "I.D. x 50 'Assemblage d'air avec un coupleur de sécurité à haut débit
Impossible de charger la disponibilité du service de retrait
Assemblage de tuyaux d'air de marteau 3/4 "x 50 'rouge
Impossible de charger la disponibilité du service de retrait
Description du produit
Transfer of water, petroleum–based fluids, dilute acids, chemicals and abrasive slurries used in oil and gas well stimulation and fracking. Transfer of refined fuels (commercial gasoline, diesel fuel) oils and other petroleum products. Transfer hoses are designed for intermittent contact with refined fuels and must be drained after use. Ideal for offshore/onshore dock hose transfer applications involving discharge service for diesel oils and other similar petroleum products where an extremely lightweight, flexible hose with a high rated working pressure and a small minimum bend radius is required. For Bio–Diesel and other alternative fuel applications, see Fuel Master™ XTreme™. Petroleum transfer hoses may be used with all grades of Bio–Diesel only if the exposure is intermittent and the hose is drained between uses.• CAUTION: Do not convey fuels over +120°F (+49°C)
• Service life of transfer hoses can be extended by draining hoses after use
• ARPM (Class A) High oil–resistant tube
Spécifications techniques
| Article#: | 1646963 |
|---|---|
| Taper | Pétrole - tuyau de distribution standard |
| Nom de la série du fabricant | Service de champ pétrolier Black Gold® |
| IDENTIFIANT. | 4" |
| Pression de travail | 400 psi |
| Matériau de tube intérieur | Nitrile - Type C |
| Renforcement du tuyau | Multi-pli, textile synthétique, hélice double fil |
| Matériau de couverture de tuyau | Chloroprène - Type A |
| Température | -40 à +180 ° F |
| Couleur | Noir |
| Longueur | 200 pieds |
| UNSPSC #: | 40142014 |
| Conforme à la TAA : | Oui |
