Black Gold® Fuel Tleyle, Nitrile - Type C Tube intérieur, renforcement de filament statique textile synthétique multi-plis, noir, 300 psi, 2 "ID, 200 '
(Paquet de
400)
SKU:1646906 Article#: 1646906
Transfer of refined fuels (commercial gasoline and diesel fuel) oils and other petroleum products. Ideal for offshore/onshore transfer applications involving suction and discharge service for diesel oils and other similar petroleum products where an extremely lightweight, hardwall, flexible hose with a high rated working pressure and a small minimum bend radius is required. Transfer of water, petroleum–based fluids, dilute acids, chemicals and abrasive slurries used in oil and gas well stimulation and fracking.
• CAUTION: For Bio–Diesel and other alternative fuel applications, see Fuel Master™ XTreme™. Petroleum transfer hoses may be used with all grades of Bio–Diesel only if the exposure is intermittent and the hose is drained between uses. Transfer hoses are designed for intermittent contact with refined fuels and must be drained after use. Do not convey fuels over +120°F (+49°C)
• ARPM (Class A) High oil–resistant tube
Impossible de charger la disponibilité du service de retrait
Fréquemment achetés ensemble
Fuel Master® Xtreme ™ 150SD tuyau ondulé 1 "x 100 'noir
Impossible de charger la disponibilité du service de retrait
Fuel Master® 150SD MEGAFLEX® Hose 6 "x 100 'noir
Impossible de charger la disponibilité du service de retrait
Fuel Master® 150D tuyau ondulé 2 "x 100 'rouge
Impossible de charger la disponibilité du service de retrait
Couplage de tuyau à serrage 3/8 "x 9 / 16-18
Impossible de charger la disponibilité du service de retrait
Coup de tuyau à couple constant SS 2-1 / 4 à 3-1 / 8 "
Impossible de charger la disponibilité du service de retrait
Z du tuyau à sertissage Z Série 1/2 x 3/4-16 "
Impossible de charger la disponibilité du service de retrait
SAE FLAT WASHER À travers l'acier durci 5/8 "
Impossible de charger la disponibilité du service de retrait
Noix de noix hexagonale 8 acier en alliage 1 / 4-20
Impossible de charger la disponibilité du service de retrait
Rondelle plate Grade 12 à travers l'acier durci M10
Impossible de charger la disponibilité du service de retrait
Food Master® Beverage tuyau 4 "x 100 'blanc
Impossible de charger la disponibilité du service de retrait
Black Gold® Oilfield Frac tuyau 4 "x 100 'noir
Impossible de charger la disponibilité du service de retrait
Huiles et tuyaux laitiers des aliments Master® 2-1 / 2 "x 100 'gris
Impossible de charger la disponibilité du service de retrait
H285 Clearforce-R Food Transfert de transfert de nourriture 3/8 "Clear
Impossible de charger la disponibilité du service de retrait
Assemblage du tuyau d'eau de l'entrepreneur 3/4 "x 25 'noir
Impossible de charger la disponibilité du service de retrait
Tuyau de lavage sous pression en caoutchouc Tough-Tek 3/8" X 100', bleu
Impossible de charger la disponibilité du service de retrait
Description du produit
Transfer of refined fuels (commercial gasoline and diesel fuel) oils and other petroleum products. Ideal for offshore/onshore transfer applications involving suction and discharge service for diesel oils and other similar petroleum products where an extremely lightweight, hardwall, flexible hose with a high rated working pressure and a small minimum bend radius is required. Transfer of water, petroleum–based fluids, dilute acids, chemicals and abrasive slurries used in oil and gas well stimulation and fracking.• CAUTION: For Bio–Diesel and other alternative fuel applications, see Fuel Master™ XTreme™. Petroleum transfer hoses may be used with all grades of Bio–Diesel only if the exposure is intermittent and the hose is drained between uses. Transfer hoses are designed for intermittent contact with refined fuels and must be drained after use. Do not convey fuels over +120°F (+49°C)
• ARPM (Class A) High oil–resistant tube
Spécifications techniques
| Article#: | 1646906 |
|---|---|
| Taper | Pétrole - tuyau de distribution standard |
| Nom de la série du fabricant | Black Gold® Fuel 300D |
| IDENTIFIANT. | 2" |
| Pression de travail | 300 psi |
| Rayon de courbure minimum | 14.0 " |
| Matériau de tube intérieur | Nitrile - Type C |
| Renforcement du tuyau | Multi-pli, textile synthétique, filament statique |
| Matériau de couverture de tuyau | Chloroprène - Type A |
| Température | -40 à +180 ° F |
| Couleur | Noir |
| Longueur | 200 pieds |
| UNSPSC #: | 40142014 |
| Conforme à la TAA : | Oui |
