Home Welding Hardfacing Alloys Build-up 706 Hard Facing Buildup Stick Rod Electrode 3/16"
Build-up
706 Hard Facing Buildup Stick Rod Electrode 3/16
706 Hard Facing Buildup Stick Rod Electrode 3/16

706 Multi-Purpose Hard Facing Buildup Stick Rod Electrode, 40 to 45 (WH) HRC Hardness, 225 to 270 Amps, AC/DCRP Polarity, 3/16"
(Pack of 10)

Item#: P12665

Certanium®

Alloys for repairs and buildup prior to overlaying with more abrasion-resistant hardfacing.
Superior Advantages
• Versatile – easy to use on all steels
• Resists cracking
• Increased deposition rates save time and money
• Work hardens under impact
Buildup for hardfacing, joining manganese, carbon steels and stainless steels
Tensile Strength: 101,000 PSIElongation: 34%Hardness: Rc 45, work-hardenedPolarity: AC or DC Reverse
Typical Applications
• Shaft buildup
• Equipment part repairs – gears, booms, crusher rolls and hammers
• Welding alloy steel to manganese steel
• Frogs and switch points
Usage ProcedureUse AC or DC reverse polarity. Electrode may be used in contact or by holding an arc. When used for joining, stringer beads are best. When used as a build-up, weaving is acceptable. Manganese steel should be kept below 550°F (288°C) by skip welding or artificial cooling. Prior to build-up, all fatigued, cracked, or spalled material should be removed. Chip slag between passes.CANNOT BE TORCH CUT

Read More
Check Availability

California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov

Frequently Bought Together

7770 Hard Facing Buildup Stick Rod Electrode 5/32

7770 Hard Facing Buildup Stick Rod Electrode 5/32"

Item#: CW1879
706 Hard Facing Buildup MIG Welding Wire 1/16

706 Hard Facing Buildup MIG Welding Wire 1/16"

Item#: P19543
706 Hard Facing Buildup Stick Rod Electrode 3/32

706 Hard Facing Buildup Stick Rod Electrode 3/32"

Item#: P12785
281 Martensitic Stick Rod Electrode 5/32

281 Martensitic Stick Rod Electrode 5/32"

Item#: P12037
172 Latch Bar And Dutchman Hardfacing Alloy 3/16X18

172 Latch Bar And Dutchman Hardfacing Alloy 3/16X18

Item#: EG1722000X
706 Hard Facing Buildup MIG Welding Wire 1/16

706 Hard Facing Buildup MIG Welding Wire 1/16"

Item#: P19543
4Pc Adjustable/Pipe Wrench Set, 4pc, 6

4Pc Adjustable/Pipe Wrench Set

Item#: DY89310022
3Pc Adjustable/Pipe Wrench Set, 3pc, 6

3Pc Adjustable/Pipe Wrench Set

Item#: DY89310230
Interchangeable Hex Bit Set 20Pc Torx, 20 Pc, Interchangeable Torx Quick Release Hex Bit Set

Interchangeable Hex Bit Set 20Pc Metric

Item#: DY89310521
Waterproof Work Aqua Light 66 LED, Waterproof Aqua Light, 66 LED, Blue, 18-7/8

Waterproof Work Aqua Light 66 LED

Item#: DY80000105
SAE Flat Washer Thru-Hardened Steel 1/4

SAE Flat Washer Thru-Hardened Steel 1/4"

Item#: 88435
Locknut with Nylon Insert Grade 8 5/16-24, Locknut with Nylon Insert, Grade 8, Alloy Steel, Yellow Zinc Finish, Fine Thread

SAE J995C Locknut with Nylon Insert Grade 8 1/2-13

Item#: 53983
X-Tractalloy Extracting Welding Electrode Non-Conductive Flux 3/16

X-Tractalloy Extracting Welding Electrode Non-Conductive Flux 3/32

Item#: EG00450000
Round Soapstone Holder Heavy Duty, Round Soapstone Holder, Heavy Duty, Brass, Stainless Steel Pocket Clip

Round Soapstone Holder Heavy Duty

Item#: CW1568
321 Mild and Carbon Steel MIG Welding Wire 0.035

321 Mild and Carbon Steel MIG Welding Wire 0.035"

Item#: CW1931

Product Description

Alloys for repairs and buildup prior to overlaying with more abrasion-resistant hardfacing.
Superior Advantages
• Versatile – easy to use on all steels
• Resists cracking
• Increased deposition rates save time and money
• Work hardens under impact
Buildup for hardfacing, joining manganese, carbon steels and stainless steels
Tensile Strength: 101,000 PSIElongation: 34%Hardness: Rc 45, work-hardenedPolarity: AC or DC Reverse
Typical Applications
• Shaft buildup
• Equipment part repairs – gears, booms, crusher rolls and hammers
• Welding alloy steel to manganese steel
• Frogs and switch points
Usage ProcedureUse AC or DC reverse polarity. Electrode may be used in contact or by holding an arc. When used for joining, stringer beads are best. When used as a build-up, weaving is acceptable. Manganese steel should be kept below 550°F (288°C) by skip welding or artificial cooling. Prior to build-up, all fatigued, cracked, or spalled material should be removed. Chip slag between passes.CANNOT BE TORCH CUT

Technical Specifications

Item#: P12665
Welding Process Stick
Type Stick Electrode
Diameter 3/16 "
Base Metal Multi-Purpose
Hardness 40-45 (WH) HRC
Polarity AC/DCRP
UNSPSC #: 23271810
TAA Compliant: Yes
Weight: 10.5 lb

Product Restrictions

California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov

Suggested Products

7770 Hard Facing Buildup Stick Rod Electrode 3/16

7770 Hard Facing Buildup Stick Rod Electrode 3/16"

Item#: CW1878
7770 Hard Facing Buildup Stick Rod Electrode 1/8

7770 Hard Facing Buildup Stick Rod Electrode 1/8"

Item#: CW1880
7770 Hard Facing Buildup Stick Rod Electrode 1/4

7770 Hard Facing Buildup Stick Rod Electrode 1/4"

Item#: CW1876
375 Mild and Carbon Steel MIG Welding Wire 1/16

706 Hard Facing Buildup MIG Welding Wire 0.045"

Item#: P19557
7770 Hard Facing Buildup Stick Rod Electrode 5/32

7770 Hard Facing Buildup Stick Rod Electrode 5/32"

Item#: CW1879
706 Hard Facing Buildup MIG Welding Wire 1/16

706 Hard Facing Buildup MIG Welding Wire 1/16"

Item#: P19543
706 Hard Facing Buildup Stick Rod Electrode 3/32

706 Hard Facing Buildup Stick Rod Electrode 3/32"

Item#: P12785
706 Hard Facing Buildup Stick Rod Electrode 1/8

706 Hard Facing Buildup Stick Rod Electrode 1/8"

Item#: P12775
7770 Hard Facing Buildup Stick Rod Electrode 3/32

7770 Hard Facing Buildup Stick Rod Electrode 3/32"

Item#: CW1881
170 Build Up Of Carbon And Low Alloy Steels 3/16

170 Build Up Of Carbon And Low Alloy Steels 3/16

Item#: EG1702000B

Your Recently Viewed Items