Home Welding Hardfacing Alloys Build-up 706 Hard Facing Buildup Stick Rod Electrode 3/32"
Build-up
706 Hard Facing Buildup Stick Rod Electrode 3/32
706 Hard Facing Buildup Stick Rod Electrode 3/32

706 Multi-Purpose Hard Facing Buildup Stick Rod Electrode, 40 to 45 (WH) HRC Hardness, 65 to 100 Amps, AC/DCRP Polarity, 3/32"
(Pack of 10)

Item#: P12785

Certanium®

Alloys for repairs and buildup prior to overlaying with more abrasion-resistant hardfacing.
Superior Advantages
• Versatile – easy to use on all steels
• Resists cracking
• Increased deposition rates save time and money
• Work hardens under impact
Buildup for hardfacing, joining manganese, carbon steels and stainless steels
Tensile Strength: 101,000 PSIElongation: 34%Hardness: Rc 45, work-hardenedPolarity: AC or DC Reverse
Typical Applications
• Shaft buildup
• Equipment part repairs – gears, booms, crusher rolls and hammers
• Welding alloy steel to manganese steel
• Frogs and switch points
Usage ProcedureUse AC or DC reverse polarity. Electrode may be used in contact or by holding an arc. When used for joining, stringer beads are best. When used as a build-up, weaving is acceptable. Manganese steel should be kept below 550°F (288°C) by skip welding or artificial cooling. Prior to build-up, all fatigued, cracked, or spalled material should be removed. Chip slag between passes.CANNOT BE TORCH CUT

Read More
Check Availability

California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov

Frequently Bought Together

170 Build Up Of Carbon And Low Alloy Steels 3/16

170 Build Up Of Carbon And Low Alloy Steels 3/16

Item#: EG1702000B
170 Build Up Of Carbon And Low Alloy Steels 1/8

170 Build Up Of Carbon And Low Alloy Steels 1/8

Item#: EG1703100B
706 Hard Facing Buildup Stick Rod Electrode 5/32

706 Hard Facing Buildup Stick Rod Electrode 5/32"

Item#: P12675
7220 Carbide Hard Facing Stick Rod Electrode 3/8

7220 Carbide Hard Facing Stick Rod Electrode 3/8"

Item#: CW1847
7222 Carbide Hard Facing Stick Rod Electrode 1/4

7222 Carbide Hard Facing Stick Rod Electrode 1/4"

Item#: CW1908
7220 Carbide Hard Facing Stick Rod Electrode 1/2

7220 Carbide Hard Facing Stick Rod Electrode 1/2"

Item#: CW1848
Lock And Load Interchangeable Medium Punch and Chisel Set, 13pc

Lock And Load Interchangeable Small Punch and Chisel Set, 13pc

Item#: DY81410050
CryoBoost 1/4

CryoBoost 1/4" Dia. 1/4" Hex Shank Drill Bit

Item#: DY83611664
Telcom IDC Discrete Connector 26 to 19 AWG, Telcom IDC Discrete Connector, 26 to 19 AWG, Red/Clear, 2 or 3-Wire Butt

Telcom IDC Discrete Connector 26 to 19 AWG

Item#: 93072
SAE Flat Washer Thru-Hardened Steel 1/2

SAE Flat Washer Thru-Hardened Steel 1/2"

Item#: 88439
Interchangeable Hex Bit Set 20Pc Torx, 20 Pc, Interchangeable Torx Quick Release Hex Bit Set

Interchangeable Hex Bit Set 20Pc Torx

Item#: DY89310522
Lock Washer Alloy Steel 1/2

Lock Washer Alloy Steel 3/8"

Item#: A530
Oxy-Therm Cutting Rod 3/8 x 36

Oxy-Therm Cutting Rod 3/8 x 36"

Item#: CW3620
281 High Strength Silver Bearing Solder .031DIA 19G TUBE

281 High Strength Silver Bearing Solder .031DIA 19G TUBE

Item#: EG28172000
Oxy Acetylene Fuel Gas Three Replacement Flint, Electro-Zinc Plated

Oxy Acetylene Fuel Gas Three Replacement Flint

Item#: CW1309

Product Description

Alloys for repairs and buildup prior to overlaying with more abrasion-resistant hardfacing.
Superior Advantages
• Versatile – easy to use on all steels
• Resists cracking
• Increased deposition rates save time and money
• Work hardens under impact
Buildup for hardfacing, joining manganese, carbon steels and stainless steels
Tensile Strength: 101,000 PSIElongation: 34%Hardness: Rc 45, work-hardenedPolarity: AC or DC Reverse
Typical Applications
• Shaft buildup
• Equipment part repairs – gears, booms, crusher rolls and hammers
• Welding alloy steel to manganese steel
• Frogs and switch points
Usage ProcedureUse AC or DC reverse polarity. Electrode may be used in contact or by holding an arc. When used for joining, stringer beads are best. When used as a build-up, weaving is acceptable. Manganese steel should be kept below 550°F (288°C) by skip welding or artificial cooling. Prior to build-up, all fatigued, cracked, or spalled material should be removed. Chip slag between passes.CANNOT BE TORCH CUT

Technical Specifications

Item#: P12785
Welding Process Stick
Type Stick Electrode
Diameter 3/32 "
Base Metal Multi-Purpose
Hardness 40-45 (WH) HRC
Polarity AC/DCRP
UNSPSC #: 23271810
TAA Compliant: Yes
Weight: 10.0 lb

Product Restrictions

California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov

Suggested Products

7770 Hard Facing Buildup Stick Rod Electrode 3/16

7770 Hard Facing Buildup Stick Rod Electrode 3/16"

Item#: CW1878
7770 Hard Facing Buildup Stick Rod Electrode 1/8

7770 Hard Facing Buildup Stick Rod Electrode 1/8"

Item#: CW1880
7770 Hard Facing Buildup Stick Rod Electrode 1/4

7770 Hard Facing Buildup Stick Rod Electrode 1/4"

Item#: CW1876
375 Mild and Carbon Steel MIG Welding Wire 1/16

706 Hard Facing Buildup MIG Welding Wire 0.045"

Item#: P19557
7770 Hard Facing Buildup Stick Rod Electrode 5/32

7770 Hard Facing Buildup Stick Rod Electrode 5/32"

Item#: CW1879
706 Hard Facing Buildup MIG Welding Wire 1/16

706 Hard Facing Buildup MIG Welding Wire 1/16"

Item#: P19543
706 Hard Facing Buildup Stick Rod Electrode 1/8

706 Hard Facing Buildup Stick Rod Electrode 1/8"

Item#: P12775
7770 Hard Facing Buildup Stick Rod Electrode 3/32

7770 Hard Facing Buildup Stick Rod Electrode 3/32"

Item#: CW1881
170 Build Up Of Carbon And Low Alloy Steels 3/16

170 Build Up Of Carbon And Low Alloy Steels 3/16

Item#: EG1702000B

Your Recently Viewed Items