ALLIGATOR® Anchor, Nylon, Flange Type, 3/16" Drill Size, #4 to #10 Screw Diameter
(Pack of
25)
Flange Anchor
Anti-rotation fins prevent spinning while Alligator Anchor extrudes along screw in solid walls or locks open in hollow walls.
• Ideal for use in a wide variety of materials including concrete, wood, plaster, flakeboard, aerated concrete, brick, masonry, stone, drywall, cinder block, ceramic tile and stucco
Toggler® is a registered trademark of Mechanical Plastics Corp.
Tests are ultimate load. However, industry safety standards recommend 1/4 of the value for actual application. Age and condition of the material and the screw size will cause tensile strength to vary.
Couldn't load pickup availability
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
Catalog page#: 6-38
Frequently Bought Together
Conical Screw Anchor Plastic #14 to #16 x 1-3/8"
Couldn't load pickup availability
Masonry Anchor Hex Washer Head Steel 3/16 x 1-1/4"
Couldn't load pickup availability
Wedge Type Stud Bolt Anchor Steel 1/2 x 4-1/4"
Couldn't load pickup availability
SAE J995C Locknut with Nylon Insert Grade 8 1/4-20
Couldn't load pickup availability
Flat Washer Grade 12 Thru-Hardened Steel M8
Couldn't load pickup availability
SAE J995C Locknut with Nylon Insert Grade 8 3/8-16
Couldn't load pickup availability
Butt Connector 16 to 14 AWG Clear
Couldn't load pickup availability
Waterproof Work Aqua Light 66 LED
Couldn't load pickup availability
Butt Connector 22 to 18 AWG Clear
Couldn't load pickup availability
Conical Screw Anchor Plastic #8 to #10 x 7/8"
Couldn't load pickup availability
SNAPTOGGLE® Toggle Bolt Anchor 3/16-24
Couldn't load pickup availability
Wing-Type Toggle Bolt Anchor Steel #10-24 x 3"
Couldn't load pickup availability
Product Description
Flange AnchorAnti-rotation fins prevent spinning while Alligator Anchor extrudes along screw in solid walls or locks open in hollow walls.
• Ideal for use in a wide variety of materials including concrete, wood, plaster, flakeboard, aerated concrete, brick, masonry, stone, drywall, cinder block, ceramic tile and stucco
Toggler® is a registered trademark of Mechanical Plastics Corp.
Tests are ultimate load. However, industry safety standards recommend 1/4 of the value for actual application. Age and condition of the material and the screw size will cause tensile strength to vary.
Technical Specifications
| Item#: | 62626 |
|---|---|
| Length | 1 1/8 " |
| Type | Alligator |
| Size | 3/16 " |
| Diameter | 3/16 " |
| Material | Nylon |
| Screw Diameter | No. 4 - No. 10 " |
| Drill Size | 3/16 " |
| Anchor Size | 3/16 " |
| Tensile Pull-Out Strength | 2,316 lb |
| UNSPSC #: | 31162103 |
| TAA Compliant: | Yes |
| Weight: | 0.06 lb |
Product Restrictions
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
