Band-It Clamp High-Carbon Steel 4 x 5/8"
(Pack of
10.0)
• Made of high-carbon electrolytic galvanized steel to resist corrosion• 1/32" thick band
• Designed for industrial and production equipment
1. Insert clamp in tool, then insert wrench assembly. If you prefer, install wrench assembly before clamp is inserted.2. Start pumping ratchet wrench forward until proper tension has been applied.3. Place punch on clamp buckle and, while holding tension with ratchet wrench, lock clamp by striking punch with hammer until clamp is tight.4. While holding tension with wrench, swing tool up against buckle, then backward to break off clamp tail. To loosen clamp tail, wind until tail is free. Remove mandrel-wrench assembly.
Couldn't load pickup availability
California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov
Catalog Page#: 22-8
Frequently Bought Together
Hose Clamp 301 SS 9/16 to 1-1/4"
Couldn't load pickup availability
Hose Clamp 301 SS 3/4 to 1-3/4"
Couldn't load pickup availability
Super 77 Hose Clamp SS 1/2 to 1-1/8"
Couldn't load pickup availability
Ball Check Grease Fitting Straight
Couldn't load pickup availability
DOT Compression Sleeve Brass 3/8"
Couldn't load pickup availability
Super 77 Miniature Hose Clamp SS 7/32 to 5/8"
Couldn't load pickup availability
Hose Clamp 301 SS 9/16 to 1-1/4"
Couldn't load pickup availability
Hose Clamp 301 SS 3/4 to 1-3/4"
Couldn't load pickup availability
Super 77 Hose Clamp SS 1/2 to 1-1/8"
Couldn't load pickup availability
Hex Head Plug Brass 3/8-18 Male NPT
Couldn't load pickup availability
Hex Head Plug Brass 1/4-18 Male NPT
Couldn't load pickup availability
DOT Union Brass 3/8 x 3/8"
Couldn't load pickup availability
Butt Connector 16 to 14 AWG Blue
Couldn't load pickup availability
High Solids Paints Gloss Black
Couldn't load pickup availability
Butt Connector 22 to 18 AWG Red
Couldn't load pickup availability
Product Description
• Made of high-carbon electrolytic galvanized steel to resist corrosion• 1/32" thick band• Designed for industrial and production equipment
1. Insert clamp in tool, then insert wrench assembly. If you prefer, install wrench assembly before clamp is inserted.2. Start pumping ratchet wrench forward until proper tension has been applied.3. Place punch on clamp buckle and, while holding tension with ratchet wrench, lock clamp by striking punch with hammer until clamp is tight.4. While holding tension with wrench, swing tool up against buckle, then backward to break off clamp tail. To loosen clamp tail, wind until tail is free. Remove mandrel-wrench assembly.
Technical Specifications
| Item#: | 81196 |
|---|---|
| Category | Band-It Clamp |
| Material | Galvanized High-Carbon Steel |
| Size | 4 " |
| I.D. | 4 " |
| Minimum Diameter | 4 " |
| Band Width | 5/8 " |
| Width | 5/8 " |
| Thickness | 1/32 " |
| UNSPSC #: | 31162906 |
| TAA Compliant: | Yes |
| Weight: | 1.77 lb |
Product Restrictions
California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov
