Large Portable Magnetic Drill 2"
(Pack of
1.0)
• Capacity: 2" x 2"
• Height (maximum): 22-1/4"
• Weight: 34.2 lbs.
• Magnet: 3,035 lbs.
• Variable speed: Reverse function for tapping
• Pressure indicator technology: Visual cues for increasing or decreasing pressure on material
• Reversible handle
• Coolant arbor and 1/2" chuck included
NOTE: Magnet needs a minimum of 3/8" of material for the magnet to hold. Insufficient thickness will cause the magnet to lose hold and the system will not allow the motor to start.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Frequently Bought Together
Annular Cutter Center Pin For 1/2"-11/16" Diameter Cutter
Couldn't load pickup availability
Annular Cutter Center Pin 7/16"
Couldn't load pickup availability
Annular Cutter Ejector Pin For 1" Cutting Depth Cutters
Couldn't load pickup availability
Premium Grinding Wheel 4-1/2"
Couldn't load pickup availability
Reinforced Mini Cut-Off Wheel 3"
Couldn't load pickup availability
Jobber Length Drill Bit HSS 11/64"
Couldn't load pickup availability
Low Profile Portable Magnetic Drill 2"
Couldn't load pickup availability
Portable Magnetic Drill 1-1/2"
Couldn't load pickup availability
Stepdown Butt Connector 22 to 18/16 to 14 AWG
Couldn't load pickup availability
Superbutt Connector 22 to 18 AWG Red
Couldn't load pickup availability
SAE Flat Washer Thru-Hardened Steel 1/4"
Couldn't load pickup availability
3/8" Fractional Drill Bit, Jobber Length, W/Flats
Couldn't load pickup availability
Cut-Off Wheel for Right Angle Grinder 4-1/2"
Couldn't load pickup availability
Twist-On Surface Conditioning Disc 3" Maroon
Couldn't load pickup availability
Product Description
• Capacity: 2" x 2"• Height (maximum): 22-1/4"
• Weight: 34.2 lbs.
• Magnet: 3,035 lbs.
• Variable speed: Reverse function for tapping
• Pressure indicator technology: Visual cues for increasing or decreasing pressure on material
• Reversible handle
• Coolant arbor and 1/2" chuck included
NOTE: Magnet needs a minimum of 3/8" of material for the magnet to hold. Insufficient thickness will cause the magnet to lose hold and the system will not allow the motor to start.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Technical Specifications
| Item#: | 1574608 |
|---|---|
| Height | 22-1/4" maximum; 17-9/16" minimum |
| Width | 7-43/64 " |
| Length | 12-13/32 " |
| Magnetic Dead Lift | 3,370 |
| Motor | 2 hp 120V 10A 1500W (single phase) |
| Arbor Bore | 3/4 " |
| Cutter Diameter | 2 " |
| Depth of Cut | 2 " |
| Drill Point Breakaway | 3035 |
| Magnetic Base | 7-7/8" X "3-7/8" X"1.5" |
| Centerline Pilot to Motor Face | 2-1/4 " |
| Centerline Pilot to Magnet Face | 2-3/64 " |
| UNSPSC #: | 23241801 |
| TAA Compliant: | Yes |
| Weight: | 0.0 lb |
