Nylon Hose Guard 1.42" ID x 25' Length
(Pack of
1.0)
A simple and effective way to reduce hose replacement in high-abrasion areas. Nylon Hose Guards are easy to use and a smart alternative to continuously replacing worn hoses. Woven nylon construction is the perfect barrier to severe abrasion in harsh environments.
• Easy to install• Allows bundling of hose lines
• Meets MSHA 207
1. Cut hose guard to desired length. Sear edges with heat to prevent unraveling.2. Insert hose line(s) into sleeve.3. Clamp with a nylon tie, band clamp or other suitable clamp to hold sleeve in position. Clamping may not be necessary if the sleeve covers the entire hose assembly.
25 ft. per roll
The sizes indicated are related to the hose O.D. and may not fit over fitting. For over-the-fitting applications, a larger size may be needed.
CAUTION: Not recommended for use in applications where surrounding temperatures exceed 250°F (121°C)
Couldn't load pickup availability
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
Catalog page#: 8-89
Frequently Bought Together
Push-to-Connect Union Nylon 1/4 x 1/4"
Couldn't load pickup availability
Pipe Street Elbow Brass 90° 1/2-14 x 1/2-14
Couldn't load pickup availability
Forged Body Ball Valve Brass 1 x 1"
Couldn't load pickup availability
Non-Perforated Clamp 316 SS #4 7/16 to 11/16"
Couldn't load pickup availability
Non-Perforated Clamp 316 SS #6 1/2 to 13/16"
Couldn't load pickup availability
Hose Clamp 301 SS 9/16 to 1-1/16"
Couldn't load pickup availability
Push-to-Connect Connector Brass 6mm x 1/8"
Couldn't load pickup availability
Push-to-Connect Elbow Nylon 5/16 x 1/8"
Couldn't load pickup availability
Push-to-Connect Elbow Nylon 5/16 x 3/8"
Couldn't load pickup availability
SAE J995C Locknut with Nylon Insert Grade 8 1/2-13
Couldn't load pickup availability
Self-Drilling Screw Hex Head 1/4-14 x 1"
Couldn't load pickup availability
SAE Flat Washer Thru-Hardened Steel 5/8"
Couldn't load pickup availability
Product Description
A simple and effective way to reduce hose replacement in high-abrasion areas. Nylon Hose Guards are easy to use and a smart alternative to continuously replacing worn hoses. Woven nylon construction is the perfect barrier to severe abrasion in harsh environments.• Easy to install• Allows bundling of hose lines
• Meets MSHA 207
1. Cut hose guard to desired length. Sear edges with heat to prevent unraveling.2. Insert hose line(s) into sleeve.3. Clamp with a nylon tie, band clamp or other suitable clamp to hold sleeve in position. Clamping may not be necessary if the sleeve covers the entire hose assembly.
25 ft. per roll
The sizes indicated are related to the hose O.D. and may not fit over fitting. For over-the-fitting applications, a larger size may be needed.
CAUTION: Not recommended for use in applications where surrounding temperatures exceed 250°F (121°C)
Technical Specifications
| Item#: | 96563 |
|---|---|
| Material | Nylon |
| I.D. | 1.42 " |
| Description | Hose Guard |
| Length | 25 ft |
| Quantity Per Package | 1.0000 |
| UNSPSC #: | 40183000 |
| TAA Compliant: | No |
| Weight: | 1.59 lb |
Product Restrictions
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
