SnapSkru® Self-Drilling Wall Anchor Kit, Nylon, #8 to #10 Screw Diameter, 50 Pieces
(Pack of
1)
SKU:18286 Item#: 18286
18286 Contains:25 SnapSkru™ Standard Anchors (No. 50878) and 25 No. 8 x 1-1/2" Phillips Pan Head Sheet Metal Screws (No. 85222)
• Anchor locks on wall; hear it “pop” and lock
• Shock- and vibration-resistant
• Installs with a screwdriver or screw gun; no pre-drilling necessary
• Positive stop resists over-turning
• Screw and fixture can be removed, leaving anchor in wall for reuse
• Remove and reinstall anchor in same hole
• For use in 3/8", 1/2" and 5/8" drywall applications
1. Press tip of SnapSkru™ anchor into drywall using a No. 2 Phillips screwdriver or screw gun. Drive anchor clockwise into drywall until anchor stops flush with wall.
2. Place item over anchor and insert screw.
3. Tighten screw flush with item. Screw “pops” open anchor, locking anchor to wall.
Couldn't load pickup availability
Catalog page#: 6-41
Frequently Bought Together
Conical Screw Anchor Kit Plastic 101Pcs
Couldn't load pickup availability
Conical Screw Anchor Kit Plastic 401Pcs
Couldn't load pickup availability
Standard Self-Drilling Wallboard Anchor Kit 41Pcs
Couldn't load pickup availability
3/16X1-1/4 Chrome Ez-One Phillips Pan Hd
Couldn't load pickup availability
Masonry Anchor TORX® Flat Head Steel 3/16 x 2-1/4"
Couldn't load pickup availability
Wedge Type Stud Bolt Anchor SS 1/2 x 3-3/4"
Couldn't load pickup availability
Self-Drilling Screw Hex Head #12-14 x 1"
Couldn't load pickup availability
Hex Nut Grade 5 Steel 1/2-13
Couldn't load pickup availability
Hex Nut Grade 5 Steel 5/16-18
Couldn't load pickup availability
Superbutt Connector 22 to 18 AWG Red
Couldn't load pickup availability
Flat Washer Grade 12 Thru-Hardened Steel M12
Couldn't load pickup availability
Master Series Penlight Flashlight
Couldn't load pickup availability
Product Description
18286 Contains:25 SnapSkru™ Standard Anchors (No. 50878) and 25 No. 8 x 1-1/2" Phillips Pan Head Sheet Metal Screws (No. 85222)• Anchor locks on wall; hear it “pop” and lock
• Shock- and vibration-resistant
• Installs with a screwdriver or screw gun; no pre-drilling necessary
• Positive stop resists over-turning
• Screw and fixture can be removed, leaving anchor in wall for reuse
• Remove and reinstall anchor in same hole
• For use in 3/8", 1/2" and 5/8" drywall applications
1. Press tip of SnapSkru™ anchor into drywall using a No. 2 Phillips screwdriver or screw gun. Drive anchor clockwise into drywall until anchor stops flush with wall.
2. Place item over anchor and insert screw.
3. Tighten screw flush with item. Screw “pops” open anchor, locking anchor to wall.
Technical Specifications
| Item#: | 18286 |
|---|---|
| Type | Wall Anchors |
| Material | Nylon |
| UNSPSC #: | 31162103 |
| TAA Compliant: | No |
| Weight: | 0.59 lb |
