SNAPTOGGLE® Toggle Bolt Anchor 3/8-16
(Pack of
10)
Three times faster than conventional toggle bolts
Requires a smaller pilot hole and uses a shorter bolt
Stays in place with or without a bolt
Heads won’t fall behind wall
Wall or ceiling thickness range: 3/8" 2-1/2"
Minimum bolt length: Fixture thickness + wall or ceiling thickness + 1/2"
Minimum clearance behind wall: 1-7/8"
Tests are ultimate load. However, industry safety standards recommend 1/4 of the value for actual application. Age and condition of the material and the screw size will cause tensile strength to vary.Toggler® is a registered trademark of Mechanical Plastics Corp.
Couldn't load pickup availability
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
Catalog page#: 6-37
Frequently Bought Together

Wing-Type Toggle Bolt Anchor Steel #6-32 x 3"
Couldn't load pickup availability

Masonry Anchor Hex Washer Head Steel 3/16 x 1-3/4"
Couldn't load pickup availability

ALLIGATOR® Anchor Nylon #6 to #10
Couldn't load pickup availability

Hex Nut Grade 8 Alloy Steel 1/4-20
Couldn't load pickup availability

USS Flat Washer Thru-Hardened Steel 5/16"
Couldn't load pickup availability

Locknut with Nylon Insert Grade 8 5/16-18
Couldn't load pickup availability

Autobahn Ergo Magna EZ Crimper Ratcheting Terminal Crimper
Couldn't load pickup availability

Butt Connector 22 to 18 AWG Red
Couldn't load pickup availability

Vision Pro Super
Couldn't load pickup availability

ALLIGATOR® Anchor Nylon #4 to #10
Couldn't load pickup availability

Pin Drive Anchor Mushroom Head Nylon 1/4 x 3/4"
Couldn't load pickup availability

Wing-Type Toggle Bolt Anchor Steel #10-24 x 4"
Couldn't load pickup availability
Product Description
Three times faster than conventional toggle bolts Requires a smaller pilot hole and uses a shorter bolt
Stays in place with or without a bolt
Heads won’t fall behind wall
Wall or ceiling thickness range: 3/8" 2-1/2"
Minimum bolt length: Fixture thickness + wall or ceiling thickness + 1/2"
Minimum clearance behind wall: 1-7/8"
Tests are ultimate load. However, industry safety standards recommend 1/4 of the value for actual application. Age and condition of the material and the screw size will cause tensile strength to vary.Toggler® is a registered trademark of Mechanical Plastics Corp.
Technical Specifications
Item#: | 90919 |
---|---|
Type | Toggle Bolt Anchor |
Size | 3/8-16 " |
Diameter | 3/8 " |
Thread | Coarse |
Thread Pitch | 16 tpi |
Drill Size | 3/4 " |
Tensile Proof Test Load In Concrete | 1,167 lb |
Shear Proof Test Load | 2,044 lb |
Tensile Proof Test Load | 1120 lb |
Bolt Size | 3/8-16 " |
UNSPSC #: | 31162103 |
TAA Compliant: | Yes |
Weight: | 0.68 lb |
Product Restrictions
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
