Solid Drill Bit, Carbide, Titanium Carbonitride Finish, 135° Point, 3/4" Flute Length, 3/16 x 2"
(Pack of
1)
SKU:P58029 Item#: P58029
• Modified relief angles on a 135° point penetrate the workpiece easier while maintaining a durable outside cutting edge
• Titanium CarboNitride (TiCN) coating improves heat resistance and reduces wear to the cutting edges; outperforms Titanium Nitride (TiN) coatings
• Three-flute design removes chips effectively
• No cutting fluids are needed for Cobra™ Drill Bits
• For use on heat-treated, hardened material up to Rc 65
• Recommended for drill press operation only
NOTE: Cobra™ Drill Bits should be run at higher speeds than standard high-speed steel twist drills. It is also recommended that a woodpeckering technique be used to prevent chips from clogging in the flutes.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Couldn't load pickup availability
California Proposition 65: WARNING: Cancer -
www.P65Warnings.ca.gov
Catalog page#: 11-22
Frequently Bought Together
Carbide Drill Bit
Couldn't load pickup availability
Carbide Drill Bit
Couldn't load pickup availability
Carbide Drill Bit
Couldn't load pickup availability
Jobber Length Drill Bit HSS 1/4"
Couldn't load pickup availability
Jobber Length Drill Bit HSS 9/64"
Couldn't load pickup availability
Jobber Length Drill Bit HSS 7/64"
Couldn't load pickup availability
Jobber Length Drill Bit HSS 7/64"
Couldn't load pickup availability
Jobber Length Drill Bit HSS 15/64"
Couldn't load pickup availability
Jobber Length Drill Bit HSS 17/64"
Couldn't load pickup availability
Nylon Cable Tie 4" Black
Couldn't load pickup availability
Cross-Over Socket Extension Set, 3/8" Drive, 3 Piece
Couldn't load pickup availability
USS Flat Washer Thru-Hardened Steel 5/16"
Couldn't load pickup availability
Jobber Length Drill Bit HSS 3/8"
Couldn't load pickup availability
Jobber Length Drill Bit HSS 13/64"
Couldn't load pickup availability
Jobber Length Drill Bit HSS 7/32"
Couldn't load pickup availability
Product Description
• Modified relief angles on a 135° point penetrate the workpiece easier while maintaining a durable outside cutting edge• Titanium CarboNitride (TiCN) coating improves heat resistance and reduces wear to the cutting edges; outperforms Titanium Nitride (TiN) coatings
• Three-flute design removes chips effectively
• No cutting fluids are needed for Cobra™ Drill Bits
• For use on heat-treated, hardened material up to Rc 65
• Recommended for drill press operation only
NOTE: Cobra™ Drill Bits should be run at higher speeds than standard high-speed steel twist drills. It is also recommended that a woodpeckering technique be used to prevent chips from clogging in the flutes.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Technical Specifications
| Item#: | P58029 |
|---|---|
| Drill Type | Fractional |
| Type | Drill Bit |
| Material | Carbide |
| Finish | Titanium CarboNitride |
| Diameter | 3/16 " |
| Decimal Equivalent | 0.1875 " |
| Point | 135 ° |
| Flutes | 3 |
| Flute Length | 3/4 " |
| Overall Length | 2 " |
| SAE Code | TD0CSX 0.1875 SB056 / 00.75 - 02.00 |
| UNSPSC #: | 23241605 |
| TAA Compliant: | Yes |
| Weight: | 0.03 lb |
Product Restrictions
California Proposition 65: WARNING: Cancer -
www.P65Warnings.ca.gov
