Solid Drill Bit Kit, Carbide, Titanium Carbonitride Finish, 135° Point, 1/8 to 3/8" by 16ths
(Pack of
1)
• Modified relief angles on a 135° point penetrate the workpiece easier while maintaining a durable outside cutting edge
• Titanium CarboNitride (TiCN) coating improves heat resistance and reduces wear to the cutting edges; outperforms Titanium Nitride (TiN) coatings
• Three-flute design removes chips effectively
• Three flats are ground on the shanks (size 1/4" and greater) to reduce the chances of slippage and breaking
• No cutting fluids are needed for Cobra™ Drill Bits
• For use on heat-treated, hardened material up to Rc 65
• Recommended for drill press operation only
NOTE: Cobra™ Drill Bits should be run at higher speeds than standard high-speed steel twist drills. It is also recommended that a woodpeckering technique be used to prevent chips from clogging in the flutes.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Couldn't load pickup availability
California Proposition 65: WARNING: Cancer -
www.P65Warnings.ca.gov
Catalog page#: 11-22
Frequently Bought Together
Drill Bit Carbide 7/32"
Couldn't load pickup availability
Drill Bit Carbide 5/32"
Couldn't load pickup availability
Drill Bit Carbide 3/16"
Couldn't load pickup availability
Mounted Flap Wheel 1"
Couldn't load pickup availability
Premium Grinding Wheel 4-1/2"
Couldn't load pickup availability
Jobber Length Drill Bit HSS 25/64"
Couldn't load pickup availability
Jobber Length Drill Bit HSS 7/32"
Couldn't load pickup availability
Jobber Length Drill Bit HSS 5/32"
Couldn't load pickup availability
Jobber Length Drill Bit HSS 3/32"
Couldn't load pickup availability
SAE Flat Washer Thru-Hardened Steel 5/16"
Couldn't load pickup availability
Superbutt Connector 16 to 14 AWG Blue
Couldn't load pickup availability
SAE J995C Locknut with Nylon Insert Grade 8 1/2-13
Couldn't load pickup availability
Jobber Length Drill Bit HSS 1/8"
Couldn't load pickup availability
Mounted Flap Wheel 2"
Couldn't load pickup availability
Scotch-Brite Roloc Surface Conditioning Disc 2"
Couldn't load pickup availability
Product Description
• Modified relief angles on a 135° point penetrate the workpiece easier while maintaining a durable outside cutting edge• Titanium CarboNitride (TiCN) coating improves heat resistance and reduces wear to the cutting edges; outperforms Titanium Nitride (TiN) coatings
• Three-flute design removes chips effectively
• Three flats are ground on the shanks (size 1/4" and greater) to reduce the chances of slippage and breaking
• No cutting fluids are needed for Cobra™ Drill Bits
• For use on heat-treated, hardened material up to Rc 65
• Recommended for drill press operation only
NOTE: Cobra™ Drill Bits should be run at higher speeds than standard high-speed steel twist drills. It is also recommended that a woodpeckering technique be used to prevent chips from clogging in the flutes.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Technical Specifications
| Item#: | P7369 |
|---|---|
| Drill Type | Fractional Set |
| Type | Drill Bit Set |
| Material | Carbide |
| Finish | Titanium CarboNitride |
| Diameter | 1/8 to 3/8 by 16ths |
| Point | 135 ° |
| Flutes | 3 |
| Number of Pieces | 5 |
| UNSPSC #: | 23241605 |
| TAA Compliant: | Yes |
| Weight: | 1.14 lb |
Product Restrictions
California Proposition 65: WARNING: Cancer -
www.P65Warnings.ca.gov
