Turnbuckle, Eye and Eye, Galvanized, 1/4" x 4"
(Pack of
1)
• Turnbuckles can be used to apply tension to wire rope or cable
• Composed of a forged body and two end fittings
• Must only be applied to loads within their working load limit
• Apply turnbuckles in a straight in-line manner only. Do not allow anything to contact the turnbuckle body or end attachment threaded shanks
• Working load limits are based on a safety factor of 5 to 1
• Meets ASTM F1145 Type 1, Grade 1, Class D
• Apply load to the center of end attachment eyes – do not side load eyes
CAUTION: Do not exceed working load limits.
Couldn't load pickup availability
California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov
Catalog page#: 15-27
Frequently Bought Together
Screw Eye Light-Duty Trade Size 108 3/8" Eye
Couldn't load pickup availability
Hook Ceiling Trade Size 10
Couldn't load pickup availability
Turned Eyebolt, Zinc-Plated, 5/16" x 2"
Couldn't load pickup availability
Wire Rope Sleeve, 1/16", Aluminum
Couldn't load pickup availability
Drum Dolly 55 Gal. 1400 Lb Capacity 5 Wheel
Couldn't load pickup availability
Clevis Slip Hook, Grade 70, 3/8", 6,600 lb WLL
Couldn't load pickup availability
Vision Pro Super
Couldn't load pickup availability
Lawson Open & Shut Nut & Bolt Loosener, Rust Penetrant, SKU DA6152, 20 oz Aerosol Can
Couldn't load pickup availability
Flat Washer Grade 12 Thru-Hardened Steel M8
Couldn't load pickup availability
Turnbuckle, Jaw and Eye, Galvanized, 1" x 12"
Couldn't load pickup availability
Turnbuckle, Body Only, Self-Colored, 1" x 12"
Couldn't load pickup availability
Turnbuckle, Aluminum, Eye and Eye, 3/16" x 1.61" Take Up
Couldn't load pickup availability
Product Description
• Turnbuckles can be used to apply tension to wire rope or cable• Composed of a forged body and two end fittings
• Must only be applied to loads within their working load limit
• Apply turnbuckles in a straight in-line manner only. Do not allow anything to contact the turnbuckle body or end attachment threaded shanks
• Working load limits are based on a safety factor of 5 to 1
• Meets ASTM F1145 Type 1, Grade 1, Class D
• Apply load to the center of end attachment eyes – do not side load eyes
CAUTION: Do not exceed working load limits.
Technical Specifications
| Item#: | 1442088 |
|---|---|
| Type | Eye and Eye |
| Diameter | 1/4 " |
| Closed Length | 8 " |
| Working Load Limit | 500 lb |
| Material | Forged Steel |
| Finish | Galvanized |
| UNSPSC #: | 24101611 |
| TAA Compliant: | Yes |
| Weight: | 0.3 lb |
Product Restrictions
California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov
