Turnbuckle, Eye and Eye, Galvanized, 5/8" x 9"
(Pack of
1)
SKU:1442134 Item#: 1442134
• Turnbuckles can be used to apply tension to wire rope or cable
• Composed of a forged body and two end fittings
• Must only be applied to loads within their working load limit
• Apply turnbuckles in a straight in-line manner only. Do not allow anything to contact the turnbuckle body or end attachment threaded shanks
• Working load limits are based on a safety factor of 5 to 1
• Meets ASTM F1145 Type 1, Grade 1, Class D
• Apply load to the center of end attachment eyes – do not side load eyes
CAUTION: Do not exceed working load limits.
Couldn't load pickup availability
California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov
Frequently Bought Together
Spring Link, Stainless Steel, 3/8", 400 LB WLL
Couldn't load pickup availability
Screw Pin Anchor Shackle, 1", 17,000 lb WLL
Couldn't load pickup availability
Screw Eye Light-Duty Trade Size 108 3/8" Eye
Couldn't load pickup availability
Wire Rope Sleeve, 3/16", Aluminum
Couldn't load pickup availability
Screw Pin Anchor Shackle, 5/16", 1,500 lb WLL
Couldn't load pickup availability
Screw Pin Anchor Shackle, 3/8", 2,000 lb WLL
Couldn't load pickup availability
Flat Washer Grade 12 Thru-Hardened Steel M10
Couldn't load pickup availability
Flat Washer Grade 12 Thru-Hardened Steel M12
Couldn't load pickup availability
Superbutt Connector 16 to 14 AWG Blue
Couldn't load pickup availability
Turnbuckle, Jaw and Eye, Galvanized, 1" x 6"
Couldn't load pickup availability
Turnbuckle, Eye and Eye, Galvanized, 1/2" x 6"
Couldn't load pickup availability
Turnbuckle, Body Only, Self-Colored, 1/2" x 6"
Couldn't load pickup availability
Product Description
• Turnbuckles can be used to apply tension to wire rope or cable• Composed of a forged body and two end fittings
• Must only be applied to loads within their working load limit
• Apply turnbuckles in a straight in-line manner only. Do not allow anything to contact the turnbuckle body or end attachment threaded shanks
• Working load limits are based on a safety factor of 5 to 1
• Meets ASTM F1145 Type 1, Grade 1, Class D
• Apply load to the center of end attachment eyes – do not side load eyes
CAUTION: Do not exceed working load limits.
Technical Specifications
| Item#: | 1442134 |
|---|---|
| Manufacturer Model #: | 01287 4 |
| Type | Eye and Eye |
| Diameter | 5/8 " |
| Closed Length | 17 " |
| Working Load Limit | 3,500 lb |
| Material | Forged Steel |
| Finish | Galvanized |
| UNSPSC #: | 24101611 |
| TAA Compliant: | Yes |
Product Restrictions
California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov
