Turnbuckle, Hook and Eye, Galvanized, 1/2" x 6"
(Pack of
1)
SKU:1442154 Item#: 1442154
• Turnbuckles can be used to apply tension to wire rope or cable
• Composed of a forged body and two end fittings
• Must only be applied to loads within their working load limit
• Apply turnbuckles in a straight in-line manner only. Do not allow anything to contact the turnbuckle body or end attachment threaded shanks
• Working load limits are based on a safety factor of 5 to 1
• Meets ASTM F1145 Type 1, Grade 1, Class F
• Apply load to the center of end attachment eyes and bowl of hooks. Do not tip load hooks or side load eyes
CAUTION: Do not exceed working load limits.
Couldn't load pickup availability
California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov
Catalog page#: 15-27
Frequently Bought Together
Screw Eye Light-Duty Trade Size 104 1/2" Eye
Couldn't load pickup availability
Swivel Eye Bolt Snap, 3/8" Eye Size, 2-15/16" Length, Zinc Finish
Couldn't load pickup availability
Screw Pin Anchor Shackle, 3/16", 1,000 lb WLL
Couldn't load pickup availability
Screw Pin Anchor Shackle, 1/4", 1,000 lb WLL
Couldn't load pickup availability
Tarp Strap Epdm Rubber with Hooks 6" Long
Couldn't load pickup availability
Wire Rope, Steel, Nylon Coated, 7x7, 1/16", 480 lbs Breaking Strength
Couldn't load pickup availability
Self-Drilling Screw Hex Head #10-16 x 3/4"
Couldn't load pickup availability
Flat Washer Grade 12 Thru-Hardened Steel M12
Couldn't load pickup availability
Superbutt Connector 16 to 14 AWG Blue
Couldn't load pickup availability
Turnbuckle, Stainless Steel, Eye and Eye, 3/8" x 6.00" Take Up
Couldn't load pickup availability
Turnbuckle, Stainless Steel, Eye and Eye, 3/8" x 6" Take Up
Couldn't load pickup availability
Turnbuckle, Stainless Steel, Jaw and Jaw, 3/8" x 6.00" Take Up
Couldn't load pickup availability
Product Description
• Turnbuckles can be used to apply tension to wire rope or cable• Composed of a forged body and two end fittings
• Must only be applied to loads within their working load limit
• Apply turnbuckles in a straight in-line manner only. Do not allow anything to contact the turnbuckle body or end attachment threaded shanks
• Working load limits are based on a safety factor of 5 to 1
• Meets ASTM F1145 Type 1, Grade 1, Class F
• Apply load to the center of end attachment eyes and bowl of hooks. Do not tip load hooks or side load eyes
CAUTION: Do not exceed working load limits.
Technical Specifications
| Item#: | 1442154 |
|---|---|
| Manufacturer Model #: | 01723 7 |
| Type | Hook and Eye |
| Diameter | 1/2 " |
| Closed Length | 13-5/8 " |
| Working Load Limit | 1,500 lb |
| Material | Forged Steel |
| Finish | Galvanized |
| UNSPSC #: | 24101611 |
| TAA Compliant: | Yes |
| Weight: | 1.67 lb |
Product Restrictions
California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov
