Turnbuckle, Jaw and Jaw, Galvanized, 5/8" x 6"
(Pack of
1)
SKU:1442502 Item#: 1442502
• Turnbuckles can be used to apply tension to wire rope or cable
• Composed of a forged body and two end fittings
• Must only be applied to loads within their working load limit
• Apply turnbuckles in a straight in-line manner only. Do not allow anything to contact the turnbuckle body or end attachment threaded shanks
• Working load limits are based on a safety factor of 5 to 1
• Meets ASTM F1145 Type 1, Grade 1, Class G
CAUTION: Do not exceed working load limits.
Couldn't load pickup availability
California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov
Catalog page#: 15-27
Frequently Bought Together
Oversize Screw Pin Anchor Shackle, Stainless Steel, 3/8", 1,500 lb WLL
Couldn't load pickup availability
Round Pin Anchor Shackle, 5/8", 9,000 lb WLL
Couldn't load pickup availability
Oversize Screw Pin Anchor Shackle, Stainless Steel, 5/16", 1,300 lb WL
Couldn't load pickup availability
Wire Rope Clip, Malleable, Galvanized, 3/8"
Couldn't load pickup availability
Wire Rope, Steel, Vinyl Coated, 7x7, 1/16", 480 lbs Breaking Strength
Couldn't load pickup availability
Wire Rope, Steel, Nylon Coated, 7x7, 3/32", 920 lbs Breaking Strength
Couldn't load pickup availability
Hex Nut Grade 8 Alloy Steel 5/16-18
Couldn't load pickup availability
Cable Tie 11.41" Black
Couldn't load pickup availability
Cable Tie 13.38" Black
Couldn't load pickup availability
Turnbuckle, Jaw and Jaw, Galvanized, 3/8" x 6"
Couldn't load pickup availability
Turnbuckle, Jaw and Jaw, Galvanized, 5/8" x 12"
Couldn't load pickup availability
Turnbuckle, Eye and Eye, Galvanized, 1" x 6"
Couldn't load pickup availability
Product Description
• Turnbuckles can be used to apply tension to wire rope or cable• Composed of a forged body and two end fittings
• Must only be applied to loads within their working load limit
• Apply turnbuckles in a straight in-line manner only. Do not allow anything to contact the turnbuckle body or end attachment threaded shanks
• Working load limits are based on a safety factor of 5 to 1
• Meets ASTM F1145 Type 1, Grade 1, Class G
CAUTION: Do not exceed working load limits.
Technical Specifications
| Item#: | 1442502 |
|---|---|
| Type | Jaw and Jaw |
| Diameter | 5/8 " |
| Closed Length | 15-3/4 " |
| Working Load Limit | 3,500 lb |
| Material | Forged Steel |
| Finish | Galvanized |
| UNSPSC #: | 24101611 |
| TAA Compliant: | Yes |
Product Restrictions
California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov
