5/8 Drop In Anchor
(Pack of
5.0)
• An all-steel anchor
• Use with standard bolts for flush mount applications in concrete or masonry
• Designed to provide high holding strength with relatively shallow embedment depths
1. Drill hole 1/8" deeper than anchor length for flush mounting. Where surface deterioration is present, drill hole slightly deeper to permit anchor to be recessed.
2. Drop anchor into hole. If hole is slightly undersized, tap anchor with hammer until it bottoms in hole.
3. To set expander plug, installation tool can be struck a few sharp blows with a hammer, or an automatic air tool or electric tool can be used.
4. Place fixture in position, insert bolt and tighten.
Frequently Bought Together
Pin Drive Anchor Mushroom Head Nylon 1/4 x 3/4"
Couldn't load pickup availability
Wing-Type Toggle Bolt Anchor Steel #6-32 x 4"
Couldn't load pickup availability
Tubular Anchor Plastic Gray #20 to #24
Couldn't load pickup availability
Drop-In Anchor Steel 1/4 x 1"
Couldn't load pickup availability
Drop-In Anchor High Strength 1/4-20 x 1-1/2"
Couldn't load pickup availability
IFI 100/107 Top Locknut Grade C 1/2-13
Couldn't load pickup availability
Self-Drilling Screw Hex Head #12-14 x 1"
Couldn't load pickup availability
Hex Cap Screw Grade 8 Alloy Steel 3/8-16 x 1-1/2"
Couldn't load pickup availability
Lock Washer Alloy Steel 3/8"
Couldn't load pickup availability
Nutsetter & Bit Set, Magnetic, 22pc
Couldn't load pickup availability
SAE J995C Locknut with Nylon Insert Grade 8 1/2-13
Couldn't load pickup availability
Product Description
• An all-steel anchor• Use with standard bolts for flush mount applications in concrete or masonry
• Designed to provide high holding strength with relatively shallow embedment depths
1. Drill hole 1/8" deeper than anchor length for flush mounting. Where surface deterioration is present, drill hole slightly deeper to permit anchor to be recessed.
2. Drop anchor into hole. If hole is slightly undersized, tap anchor with hammer until it bottoms in hole.
3. To set expander plug, installation tool can be struck a few sharp blows with a hammer, or an automatic air tool or electric tool can be used.
4. Place fixture in position, insert bolt and tighten.
Technical Specifications
| Item#: | DY09620076 |
|---|---|
| Diameter | 5/8 " |
| Overall Length | 2-1/2 " |
| Thread Pitch | 11 tpi |
| Type | Expansion Drop-In Anchor |
| Drill Size | 7/8 " |
| Hole Depth | 2-1/2 " |
| Minimum Spacing | 10 " |
| Minimum Edge Distance | 8-3/4 " |
| Allowable Tension (4,000 psi Concrete) | 2,170 lb |
| Allowable Shear (4,000 psi Concrete) | 2,770 lb |
| UNSPSC #: | 31162101 |
| TAA Compliant: | No |
| Weight: | 1.61 lb |
Product Restrictions
