Hydraulic Quick Connect Nipple, Steel, ISO 16028, 3/8" x 3/8-18, Female NPTF, 2.54" Length, 4350PSI
(Pack of
1)
SKU:29975 Item#: 29975
Keep hydraulic connections clear in dirty conditions with this Quick Connect Nipple. The flat face design wipes clean easily and operates successfully in applications involving high pressure pulses. Heavy-duty locking sleeve provides greater strength and prevents accidental disconnection, while non-spill design guards against fluid loss during connection and disconnection. Ideal for use in agriculture, construction, mobile equipment, general industrial, mining and nuclear equipment. To couple, wipe the mating faces clean and push the two halves together until they click shut. Twist the sleeve to lock the coupling. To release, align the notched sleeve with the ball and pull back – the coupling springs apart.
• Zinc-plated steel body
• PTFE and nitrile rubber seals
• Conforms to ISO 16028 Standards
• Operating temperature range: –4°F to +212°F (–20°C to +100°C)
• Meets or exceeds HTMA requirements
Dixon: HT-Series
To couple, wipe the mating faces clean and push the two halves together until they click shut. Twist the sleeve to lock the coupling. To release, align the notched sleeve with the ball and pull back – the coupling springs apart.
Couldn't load pickup availability
Catalog page#: 8-83
Frequently Bought Together
DOT Swivel Run Tee Male Brass 1/4 x 1/4-18 x 1/4"
Couldn't load pickup availability
DOT Branch Tee Male Brass 1/2 x 1/2 x 3/8-18
Couldn't load pickup availability
DOT Connector Male Brass 3/16 x 1/8-27
Couldn't load pickup availability
DOT Branch Tee Male Brass 3/8 x 3/8 x 1/4-18
Couldn't load pickup availability
DOT Swivel Run Tee Male Brass 1/4 x 1/4-18 x 1/4"
Couldn't load pickup availability
DOT Branch Tee Male Brass 1/2 x 1/2 x 3/8-18
Couldn't load pickup availability
Hydraulic Plug, 1-1/16-12"(12) Male JIC SAE 37 Degree Flare
Couldn't load pickup availability
Crimp-On Coupling 1/2" x 13/16-16
Couldn't load pickup availability
KH Series Crimp-On Coupling 1/2" x 1-1/16-12
Couldn't load pickup availability
Silicone Heater/Coolant Hose Clamp 11/16 to 1-1/4"
Couldn't load pickup availability
Quick Disconnect Coupler Steel 1/4" x 1/4-18
Couldn't load pickup availability
Ball Check Grease Fitting 90°
Couldn't load pickup availability
Hydraulic Quick Connect Coupler 3/8" x 3/8-18
Couldn't load pickup availability
Coupler, ISO16028, 1/2" Body, 1-1/16"- 12 Female ORB, Steel
Couldn't load pickup availability
Hydraulic Quick Connect Nipple Brass 1" x 1-11-1/2
Couldn't load pickup availability
Master Series Penlight Flashlight
Couldn't load pickup availability
Flat Washer Grade 12 Thru-Hardened Steel M10
Couldn't load pickup availability
Stepdown Butt Connector 16 to 14/12 to 10 AWG
Couldn't load pickup availability
Product Description
Keep hydraulic connections clear in dirty conditions with this Quick Connect Nipple. The flat face design wipes clean easily and operates successfully in applications involving high pressure pulses. Heavy-duty locking sleeve provides greater strength and prevents accidental disconnection, while non-spill design guards against fluid loss during connection and disconnection. Ideal for use in agriculture, construction, mobile equipment, general industrial, mining and nuclear equipment. To couple, wipe the mating faces clean and push the two halves together until they click shut. Twist the sleeve to lock the coupling. To release, align the notched sleeve with the ball and pull back – the coupling springs apart.• Zinc-plated steel body
• PTFE and nitrile rubber seals
• Conforms to ISO 16028 Standards
• Operating temperature range: –4°F to +212°F (–20°C to +100°C)
• Meets or exceeds HTMA requirements
Dixon: HT-Series
To couple, wipe the mating faces clean and push the two halves together until they click shut. Twist the sleeve to lock the coupling. To release, align the notched sleeve with the ball and pull back – the coupling springs apart.
Technical Specifications
| Item#: | 29975 |
|---|---|
| Hydraulic / Pneumatic | Hydraulic |
| Description | Quick Coupling |
| Type | Nipple |
| Style | ISO 16028, NFPA T3.20.15 (HTMA) |
| Standards | ISO 16028, NFPA T3.20.15 (HTMA) |
| Body Size | 10mm (3/8") |
| Thread Size | 3/8-18 |
| Thread Style | Female NPTF |
| Burst Pressure | 17,400 PSI |
| Seal Material | Nitrile |
| Material | Steel |
| Flow | 11 gal/min |
| Length | 2.36 " |
| Temperature Range | -40 to 212 F |
| Working Pressure | 4,350 PSI |
| Hex Size | 0.94 " |
| Maximum Diameter | 1.02 " |
| Coupled Length | 4.28 " |
| Tip Diameter | 0.7765 " |
| UNSPSC #: | 27121701 |
| TAA Compliant: | Yes |
| Weight: | 0.27 lb |
