SNAPTOGGLE® Toggle Bolt Anchor 1/2-13
(Pack of
10.0)
• Three times faster than conventional toggle bolts
• Requires a smaller pilot hole and uses a shorter bolt
• Stays in place with or without a bolt
• Heads won’t fall behind wall
• Wall or ceiling thickness range: 3/8" – 2-1/2"
• Minimum bolt length: Fixture thickness + wall or ceiling thickness + 1/2"
• Minimum clearance behind wall: 1-7/8"
Tests are ultimate load. However, industry safety standards recommend 1/4 of the value for actual application. Age and condition of the material and the screw size will cause tensile strength to vary.Toggler® is a registered trademark of Mechanical Plastics Corp.
Frequently Bought Together
Wing-Type Toggle Bolt Anchor Steel #6-32 x 4"
Couldn't load pickup availability
Tubular Anchor Plastic Gray #20 to #24
Couldn't load pickup availability
Wing-Type Toggle Bolt Anchor Steel 3/8-16 x 4"
Couldn't load pickup availability
Hex Nut Grade 8 Steel 5/16-18
Couldn't load pickup availability
Hex Nut Grade 8 Steel 1/4-20
Couldn't load pickup availability
SAE J995C Locknut with Nylon Insert Grade 8 5/8-11
Couldn't load pickup availability
Locknut with Nylon Insert Grade 8 5/16-18
Couldn't load pickup availability
Master Security Bit Set 203Pc
Couldn't load pickup availability
Self-Drilling Screw Hex Head #10-16 x 3/4"
Couldn't load pickup availability
Tubular Anchor Plastic Blue #13 to #15
Couldn't load pickup availability
Tubular Anchor Plastic Red #7 to #9
Couldn't load pickup availability
Self-Drilling Wallboard Mini Anchor Nylon #6
Couldn't load pickup availability
Product Description
• Three times faster than conventional toggle bolts• Requires a smaller pilot hole and uses a shorter bolt
• Stays in place with or without a bolt
• Heads won’t fall behind wall
• Wall or ceiling thickness range: 3/8" – 2-1/2"
• Minimum bolt length: Fixture thickness + wall or ceiling thickness + 1/2"
• Minimum clearance behind wall: 1-7/8"
Tests are ultimate load. However, industry safety standards recommend 1/4 of the value for actual application. Age and condition of the material and the screw size will cause tensile strength to vary.Toggler® is a registered trademark of Mechanical Plastics Corp.
Technical Specifications
| Item#: | 90920 |
|---|---|
| Type | Toggle Bolt Anchor |
| Size | 1/2-13 " |
| Diameter | 1/2 " |
| Thread | Coarse |
| Thread Pitch | 13 tpi |
| Drill Size | 3/4 " |
| Tensile Proof Test Load In Concrete | 2,038 lb |
| Shear Proof Test Load | 2,728 lb |
| Tensile Proof Test Load | 2038 lb |
| Bolt Size | 1/2-13 " |
| UNSPSC #: | 31162103 |
| TAA Compliant: | Yes |
| Weight: | 0.68 lb |
Product Restrictions
