Turnbuckle, Eye and Eye, Galvanized, 5/8" x 9"
(Pack of
1.0)
• Turnbuckles can be used to apply tension to wire rope or cable
• Composed of a forged body and two end fittings
• Must only be applied to loads within their working load limit
• Apply turnbuckles in a straight in-line manner only. Do not allow anything to contact the turnbuckle body or end attachment threaded shanks
• Working load limits are based on a safety factor of 5 to 1
• Meets ASTM F1145 Type 1, Grade 1, Class D
• Apply load to the center of end attachment eyes – do not side load eyes
CAUTION: Do not exceed working load limits.
Frequently Bought Together
Turned Eyebolt, Zinc-Plated, 3/16" x 1"
Couldn't load pickup availability
Shoulder Eyebolt, With Nut, Galvanized, 3/8" x 5"
Couldn't load pickup availability
Eyebolt, With Nut, Galvanized, 1" x 9"
Couldn't load pickup availability
Screw Pin Anchor Shackle, 5/8", 6,500 lb WLL
Couldn't load pickup availability
Tarp Strap Epdm Rubber Adjustable 24" Long
Couldn't load pickup availability
Hook Ceiling Trade Size 8
Couldn't load pickup availability
USS Flat Washer Thru-Hardened Steel 3/8"
Couldn't load pickup availability
Jobber Length Drill Bit HSS 1/4"
Couldn't load pickup availability
Flat Washer Grade 12 Thru-Hardened Steel M10
Couldn't load pickup availability
Turnbuckle, Jaw and Jaw, Galvanized, 5/8" x 12"
Couldn't load pickup availability
Turnbuckle, Eye and Eye, Galvanized, 1" x 6"
Couldn't load pickup availability
Turnbuckle, Jaw and Jaw, Galvanized, 1/2" x 6"
Couldn't load pickup availability
Product Description
• Turnbuckles can be used to apply tension to wire rope or cable• Composed of a forged body and two end fittings
• Must only be applied to loads within their working load limit
• Apply turnbuckles in a straight in-line manner only. Do not allow anything to contact the turnbuckle body or end attachment threaded shanks
• Working load limits are based on a safety factor of 5 to 1
• Meets ASTM F1145 Type 1, Grade 1, Class D
• Apply load to the center of end attachment eyes – do not side load eyes
CAUTION: Do not exceed working load limits.
Technical Specifications
| Item#: | 1442134 |
|---|---|
| Type | Eye and Eye |
| Diameter | 5/8 " |
| Closed Length | 17 " |
| Working Load Limit | 3,500 lb |
| Material | Forged Steel |
| Finish | Galvanized |
| UNSPSC #: | 24101611 |
| TAA Compliant: | Yes |
Product Restrictions
