Black Gold® Fuel Tleyle, Nitrile - Type C Tube intérieur, Textile synthétique multi-plis Double câble Hélice, noir, 300 psi, 6 "ID, 100 '
(Paquet de
100)
SKU:1646988 Article#: 1646988
Transfer of refined fuels (commercial gasoline and diesel fuel) oils and other petroleum products. Ideal for offshore/onshore transfer applications involving suction and discharge service for diesel oils and other similar petroleum products where an extremely lightweight, hardwall, flexible hose with a high rated working pressure and a small minimum bend radius is required. Transfer of water, petroleum–based fluids, dilute acids, chemicals and abrasive slurries used in oil and gas well stimulation and fracking.
• CAUTION: For Bio–Diesel and other alternative fuel applications, see Fuel Master™ XTreme™. Petroleum transfer hoses may be used with all grades of Bio–Diesel only if the exposure is intermittent and the hose is drained between uses. Transfer hoses are designed for intermittent contact with refined fuels and must be drained after use. Do not convey fuels over +120°F (+49°C)
• ARPM (Class A) High oil–resistant tube
Impossible de charger la disponibilité du service de retrait
Fréquemment achetés ensemble
Fuel Master® PVC Vapeur de vapeur de vapeur 4 "x 100 'Clear
Impossible de charger la disponibilité du service de retrait
Fuel Master® Xtreme ™ 150SD tuyau ondulé 1 "x 200 'noir
Impossible de charger la disponibilité du service de retrait
Fuel Master® Xtreme ™ 150SD tuyau ondulé 1 "x 100 'noir
Impossible de charger la disponibilité du service de retrait
Nylon mâle du coude à points 1/4 x 1 / 8-27
Impossible de charger la disponibilité du service de retrait
Pipe Street Elbow Brass 45 ° 3/8-18 x 3 / 8-18
Impossible de charger la disponibilité du service de retrait
Z du tuyau à sertissage Z Série 1/2 x 3/4-16 "
Impossible de charger la disponibilité du service de retrait
Noix de noix hexagonale 8 acier en alliage 3 / 8-16
Impossible de charger la disponibilité du service de retrait
Noix de noix hexagonale 8 acier en alliage 1 / 4-20
Impossible de charger la disponibilité du service de retrait
SAE FLAT WASHER À travers l'acier durci 5/8 "
Impossible de charger la disponibilité du service de retrait
Black Gold® ABS MUD et tuyau d'huile 6 "x 200 'noir
Impossible de charger la disponibilité du service de retrait
Tuyau d'injection de carburant diesel 5/16 "x 550 'noir
Impossible de charger la disponibilité du service de retrait
Cleariat à basse pression et tuyau d'huile 1-1 / 2 "x 10 'noir
Impossible de charger la disponibilité du service de retrait
Rouble du tuyau d'air / eau EZ-COIL 3/8 "x 50 '
Impossible de charger la disponibilité du service de retrait
H285 Clearforce-R Food Transfert de tuyau 1/2 "Clear
Impossible de charger la disponibilité du service de retrait
Rouble du tuyau d'air / eau 3/8 "x 50 '
Impossible de charger la disponibilité du service de retrait
Description du produit
Transfer of refined fuels (commercial gasoline and diesel fuel) oils and other petroleum products. Ideal for offshore/onshore transfer applications involving suction and discharge service for diesel oils and other similar petroleum products where an extremely lightweight, hardwall, flexible hose with a high rated working pressure and a small minimum bend radius is required. Transfer of water, petroleum–based fluids, dilute acids, chemicals and abrasive slurries used in oil and gas well stimulation and fracking.• CAUTION: For Bio–Diesel and other alternative fuel applications, see Fuel Master™ XTreme™. Petroleum transfer hoses may be used with all grades of Bio–Diesel only if the exposure is intermittent and the hose is drained between uses. Transfer hoses are designed for intermittent contact with refined fuels and must be drained after use. Do not convey fuels over +120°F (+49°C)
• ARPM (Class A) High oil–resistant tube
Spécifications techniques
| Article#: | 1646988 |
|---|---|
| Taper | Pétrole - tuyau de distribution standard |
| Nom de la série du fabricant | Black Gold® Fuel 300SD |
| IDENTIFIANT. | 6" |
| Pression de travail | 300 psi |
| Rayon de courbure minimum | 36.0 " |
| Matériau de tube intérieur | Nitrile - Type C |
| Renforcement du tuyau | Multi-pli, textile synthétique, hélice double fil |
| Matériau de couverture de tuyau | Chloroprène - Type A |
| Température | -40 à +180 ° F |
| Couleur | Noir |
| Longueur | 100 pieds |
| UNSPSC #: | 40142014 |
| Conforme à la TAA : | Oui |
