5/8X2-1/2 Drop In Expansion Anchor
(Pack of
5)
• An all-steel anchor
• Use with standard bolts for flush mount applications in concrete or masonry
• Designed to provide high holding strength with relatively shallow embedment depths
1. Drill hole 1/8" deeper than anchor length for flush mounting. Where surface deterioration is present, drill hole slightly deeper to permit anchor to be recessed.
2. Drop anchor into hole. If hole is slightly undersized, tap anchor with hammer until it bottoms in hole.
3. To set expander plug, installation tool can be struck a few sharp blows with a hammer, or an automatic air tool or electric tool can be used.
4. Place fixture in position, insert bolt and tighten.
Couldn't load pickup availability
California Proposition 65: WARNING: Cancer -
www.P65Warnings.ca.gov
Catalog page#: LE-12
Frequently Bought Together
Wing-Type Toggle Bolt Anchor Steel #6-32 x 2"
Couldn't load pickup availability
Conical Screw Anchor Kit Plastic 201Pcs
Couldn't load pickup availability
Wedge Type Stud Bolt Anchor Steel 1/2 x 5-1/2"
Couldn't load pickup availability
3/4 Drop In Anchor
Couldn't load pickup availability
Drop-In Anchor High Strength 1/2-13 x 3-5/8"
Couldn't load pickup availability
Drop-In Anchor High Strength 3/8-16 x 2-3/4"
Couldn't load pickup availability
SAE Flat Washer Thru-Hardened Steel 3/8"
Couldn't load pickup availability
SAE Flat Washer Thru-Hardened Steel 5/8"
Couldn't load pickup availability
Hex Nut Grade 5 Steel 1/4-20
Couldn't load pickup availability
Hex Nut Grade 8 Alloy Steel 3/8-16
Couldn't load pickup availability
Hex Nut Grade 8 Alloy Steel 1/2-13
Couldn't load pickup availability
Locknut with Nylon Insert Grade 8 5/16-18
Couldn't load pickup availability
Product Description
• An all-steel anchor• Use with standard bolts for flush mount applications in concrete or masonry
• Designed to provide high holding strength with relatively shallow embedment depths
1. Drill hole 1/8" deeper than anchor length for flush mounting. Where surface deterioration is present, drill hole slightly deeper to permit anchor to be recessed.
2. Drop anchor into hole. If hole is slightly undersized, tap anchor with hammer until it bottoms in hole.
3. To set expander plug, installation tool can be struck a few sharp blows with a hammer, or an automatic air tool or electric tool can be used.
4. Place fixture in position, insert bolt and tighten.
Technical Specifications
| Item#: | DY09620076 |
|---|---|
| Diameter | 5/8 " |
| Overall Length | 2-1/2 " |
| Thread Pitch | 11 tpi |
| Type | Expansion Drop-In Anchor |
| Drill Size | 7/8 " |
| Hole Depth | 2-1/2 " |
| Minimum Spacing | 10 " |
| Minimum Edge Distance | 8-3/4 " |
| Allowable Tension (4,000 psi Concrete) | 2,170 lb |
| Allowable Shear (4,000 psi Concrete) | 2,770 lb |
| UNSPSC #: | 31162101 |
| TAA Compliant: | No |
| Weight: | 1.61 lb |
Product Restrictions
California Proposition 65: WARNING: Cancer -
www.P65Warnings.ca.gov
