Air Brake Hose, Rubber, 1/2" ID, 7/8" OD, 50' Length, 225PSI, SAE J1402, Type A
(Pack of
1)
SKU:97252 Item#: 97252
• Black synthetic rubber tube with neoprene cover
• Multi-spiral reinforcement
• Supplied in 50-foot rolls
• Easy to assemble, reusable hose ends
• Brass material offers excellent corrosion resistance
• Meets SAE Specification J1402
• Temperature range: –40°F to +200°F (–40°C to +93°C)
• Use on air brake hose lines
Assembly information
1. Slide nut and sleeve onto hose. Make sure bevel edge of sleeve faces out toward fitting.
2. Push hose into fitting until it bottoms.
3. Screw nut until contact is made with body hex.
Couldn't load pickup availability
Catalog page#: 23-13
Frequently Bought Together
Zinc Steel Hydraulic Brake Lines 3/16" x 60"
Couldn't load pickup availability
Air Brake Tubing N-2 1/4" OD Green
Couldn't load pickup availability
Air Brake Tubing N-2 5/32" OD Yellow
Couldn't load pickup availability
Super 77 Hose Clamp SS 5/8 to 1-1/4"
Couldn't load pickup availability
DOT Connector Male Brass 1/4 x 1/8-27
Couldn't load pickup availability
Silicone Heater/Coolant Hose Clamp 11/16 to 1-1/4"
Couldn't load pickup availability
Super 77 Hose Clamp SS 7/16 to 7/8"
Couldn't load pickup availability
Hose Clamp 301 SS 2-1/16 to 3"
Couldn't load pickup availability
Super 77 Hose Clamp SS 7/16 to 1 In"
Couldn't load pickup availability
DOT Compression Connector Male Brass 3/8 x 1/4"
Couldn't load pickup availability
Miniature Clamp SS 5/16 to 7/8"
Couldn't load pickup availability
Pipe Street Elbow Brass 90° 3/8-18 x 3/8-18
Couldn't load pickup availability
Cross-Over Socket Extension Set, 3/8" Drive, 3 Piece
Couldn't load pickup availability
SAE Flat Washer Thru-Hardened Steel 5/16"
Couldn't load pickup availability
Hex Nut Grade 8 Alloy Steel 1/4-20
Couldn't load pickup availability
Product Description
• Black synthetic rubber tube with neoprene cover• Multi-spiral reinforcement
• Supplied in 50-foot rolls
• Easy to assemble, reusable hose ends
• Brass material offers excellent corrosion resistance
• Meets SAE Specification J1402
• Temperature range: –40°F to +200°F (–40°C to +93°C)
• Use on air brake hose lines
Assembly information
1. Slide nut and sleeve onto hose. Make sure bevel edge of sleeve faces out toward fitting.
2. Push hose into fitting until it bottoms.
3. Screw nut until contact is made with body hex.
Technical Specifications
| Item#: | 97252 |
|---|---|
| Category / Performance | Air Brake Hose - Rubber |
| I.D. | 1/2 " |
| Industry Rating 1 | SAE J1402, Type A |
| Industry Rating 2 | DOT FMVSS 106 |
| Hose O.D. | 7/8 " |
| Dash Size | -8 |
| Working Pressure | 225 PSI |
| O.D. | 7/8 " |
| Burst Pressure | 900 PSI |
| Temperature | -40F to +200F |
| Hose Reinforcement | 4 Spiral Polyester Yarn |
| Hose Cover Material | EPDM, RMA Class C |
| Inner Tube Material | EPDM, RMA Class C |
| UNSPSC #: | 25171700 |
| TAA Compliant: | Yes |
| Weight: | 13.25 lb |
