Air Brake Hose, Rubber, 3/8" ID, 3/4" OD, 50' Length, 225PSI, SAE J1402, Type A
(Pack of
1)
SKU:83892 Item#: 83892
• Black synthetic rubber tube with neoprene cover
• Multi-spiral reinforcement
• Supplied in 50-foot rolls
• Easy to assemble, reusable hose ends
• Brass material offers excellent corrosion resistance
• Meets SAE Specification J1402
• Temperature range: –40°F to +200°F (–40°C to +93°C)
• Use on air brake hose lines
Assembly information
1. Slide nut and sleeve onto hose. Make sure bevel edge of sleeve faces out toward fitting.
2. Push hose into fitting until it bottoms.
3. Screw nut until contact is made with body hex.
Couldn't load pickup availability
Catalog page#: 23-13
Frequently Bought Together
Air Brake Jumper Hose Assembly 3/8" ID x 30"
Couldn't load pickup availability
Air Brake Hose End Fitting Assembly Kit 1/2"
Couldn't load pickup availability
Cupro-Nickel Brake Line Coiled Tube 1/4" OD x 25'
Couldn't load pickup availability
DOT Compression Connector Male Brass 3/8 x 1/4"
Couldn't load pickup availability
DOT Swivel Elbow Male 360° Brass 3/8 x 1/4-18
Couldn't load pickup availability
DOT Elbow Male Nylon 3/8 x 1/4-18
Couldn't load pickup availability
Hose Clamp 301 SS 1-9/16 to 2-1/2"
Couldn't load pickup availability
Non-Perforated Clamp 316 SS #4 7/16 to 11/16"
Couldn't load pickup availability
Silicone Heater/Coolant Hose Clamp 13/16 to 1-1/2"
Couldn't load pickup availability
DOT Union Brass 1/2 x 1/2"
Couldn't load pickup availability
Silicone Heater/Coolant Hose Clamp 9/16 to 1-1/16"
Couldn't load pickup availability
Pipe Coupling Brass 3/8-18 x 3/8-18
Couldn't load pickup availability
Stepdown Butt Connector 22 to 18/16 to 14 AWG
Couldn't load pickup availability
Butt Connector 22 to 18 AWG Red
Couldn't load pickup availability
SAE Flat Washer Thru-Hardened Steel 3/8"
Couldn't load pickup availability
Product Description
• Black synthetic rubber tube with neoprene cover• Multi-spiral reinforcement
• Supplied in 50-foot rolls
• Easy to assemble, reusable hose ends
• Brass material offers excellent corrosion resistance
• Meets SAE Specification J1402
• Temperature range: –40°F to +200°F (–40°C to +93°C)
• Use on air brake hose lines
Assembly information
1. Slide nut and sleeve onto hose. Make sure bevel edge of sleeve faces out toward fitting.
2. Push hose into fitting until it bottoms.
3. Screw nut until contact is made with body hex.
Technical Specifications
| Item#: | 83892 |
|---|---|
| Category / Performance | Air Brake Hose - Rubber |
| I.D. | 3/8 " |
| Size | 3/8-ID 3/4 |
| Industry Rating 1 | SAE J1402, Type A |
| Industry Rating 2 | DOT FMVSS 106 |
| Hose O.D. | 3/4 " |
| Dash Size | -6 |
| Working Pressure | 225 PSI |
| O.D. | 3/8 " |
| Burst Pressure | 900 PSI |
| Temperature | -40F to +200F |
| Hose Reinforcement | 4 Spiral Polyester Yarn |
| Hose Cover Material | EPDM, RMA Class C |
| Inner Tube Material | EPDM, RMA Class C |
| UNSPSC #: | 25171700 |
| TAA Compliant: | Yes |
| Weight: | 8.61 lb |
