ALLIGATOR® Anchor, Nylon, Flangeless Type, 3/16" Drill Size, #4 to #10 Screw Diameter
(Pack of
25)
Flangeless Anchor
Anti-rotation fins prevent spinning while Alligator Anchor extrudes along screw in solid walls or locks open in hollow walls.
• Ideal for use in a wide variety of materials including concrete, wood, plaster, flakeboard, aerated concrete, brick, masonry, stone, drywall, cinder block, ceramic tile and stucco
Toggler® is a registered trademark of Mechanical Plastics Corp.
Tests are ultimate load. However, industry safety standards recommend 1/4 of the value for actual application. Age and condition of the material and the screw size will cause tensile strength to vary.
Couldn't load pickup availability
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
Catalog page#: 6-38
Frequently Bought Together
Wedge Type Stud Bolt Anchor Steel 1/2 x 4-1/4"
Couldn't load pickup availability
Masonry Anchor Hex Washer Head Steel 1/4 x 1-3/4"
Couldn't load pickup availability
Conical Screw Anchor Plastic #8 to #10 x 7/8"
Couldn't load pickup availability
PTO Pin Lock 1/4 x 2-1/2"
Couldn't load pickup availability
USS Flat Washer Thru-Hardened Steel 1/4"
Couldn't load pickup availability
IFI 100/107 Top Locknut Grade C 5/8-11
Couldn't load pickup availability
USS Flat Washer Thru-Hardened Steel 1/4"
Couldn't load pickup availability
Butt Connector 16 to 14 AWG Blue
Couldn't load pickup availability
High Solids Paints Gloss Black
Couldn't load pickup availability
Wing-Type Toggle Bolt Anchor Steel #6-32 x 3"
Couldn't load pickup availability
Wing-Type Toggle Bolt Anchor Steel 1/4-20 x 3"
Couldn't load pickup availability
Wing Type Toggle Bolt Steel #10-24 x 3"
Couldn't load pickup availability
Product Description
Flangeless AnchorAnti-rotation fins prevent spinning while Alligator Anchor extrudes along screw in solid walls or locks open in hollow walls.
• Ideal for use in a wide variety of materials including concrete, wood, plaster, flakeboard, aerated concrete, brick, masonry, stone, drywall, cinder block, ceramic tile and stucco
Toggler® is a registered trademark of Mechanical Plastics Corp.
Tests are ultimate load. However, industry safety standards recommend 1/4 of the value for actual application. Age and condition of the material and the screw size will cause tensile strength to vary.
Technical Specifications
| Item#: | 62629 |
|---|---|
| Length | 1 3/16 " |
| Type | Alligator |
| Size | 3/16 " |
| Diameter | 3/16 " |
| Material | Nylon |
| Screw Diameter | No. 4 - No. 10 " |
| Drill Size | 3/16 " |
| Anchor Size | 3/16 " |
| Tensile Pull-Out Strength | 2,316 lb |
| UNSPSC #: | 31162103 |
| TAA Compliant: | Yes |
| Weight: | 0.03 lb |
Product Restrictions
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
