DOT Compression Nut Brass 1/4"
(Pack of
5)
Fittings are shipped with nuts, sleeves and inserts preassembled, ready to slip onto tubing
Meets D.O.T. FMVSS 571.106
Temperature range: 40°F to +200°F (40°C to +93°C)
Exceeds pressure requirements of automotive air brake systems
Typical applications include air brake systems, air control and gauge lines
Used with nylon tubing (SAE J844, Type 3)
Assembly Instructions
1. Cut tubing squarely.
2. Insert tubing into fitting until bottomed on seat.
3. Tighten nut with wrench until one thread remains visible on the fitting body; or, the nut should be screwed down finger-tight, then wrench-tightened as indicated in the table (this will allow for a number of remakes).
Couldn't load pickup availability
California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov
Frequently Bought Together

DOT Compression Sleeve Brass 5/8"
Couldn't load pickup availability

DOT Compression Elbow Male 45° Brass 1/2 x 3/8"
Couldn't load pickup availability

DOT Transmission Connector Male Brass 1/8 x 5/32"
Couldn't load pickup availability

DOT Compression Elbow Male 90° Brass 1/2 x 3/8"
Couldn't load pickup availability

DOT Connector Male Brass 3/8 x 3/8-18
Couldn't load pickup availability

DOT Elbow Male 90° Brass 3/8 x 3/8-18
Couldn't load pickup availability

DOT Compression Union Brass 1/2"
Couldn't load pickup availability

Ball Check Grease Fitting 45°
Couldn't load pickup availability

Silicone Heater/Coolant Hose Clamp 7/16 to 25/32"
Couldn't load pickup availability

Super 77 Miniature Hose Clamp SS 5/16 to 7/8"
Couldn't load pickup availability

Non-Perforated Clamp 316 SS #6 1/2 to 13/16"
Couldn't load pickup availability

Pipe Coupling Brass 1/4-18 x 1/4-18
Couldn't load pickup availability

Non-Chlorinated Brake Parts Cleaner 14oz
Couldn't load pickup availability

USS Flat Washer Thru-Hardened Steel 3/8"
Couldn't load pickup availability

SAE Flat Washer Thru-Hardened Steel 5/8"
Couldn't load pickup availability
Product Description
Fittings are shipped with nuts, sleeves and inserts preassembled, ready to slip onto tubing Meets D.O.T. FMVSS 571.106
Temperature range: 40°F to +200°F (40°C to +93°C)
Exceeds pressure requirements of automotive air brake systems
Typical applications include air brake systems, air control and gauge lines
Used with nylon tubing (SAE J844, Type 3)
Assembly Instructions
1. Cut tubing squarely.
2. Insert tubing into fitting until bottomed on seat.
3. Tighten nut with wrench until one thread remains visible on the fitting body; or, the nut should be screwed down finger-tight, then wrench-tightened as indicated in the table (this will allow for a number of remakes).
Technical Specifications
Item#: | 84326 |
---|---|
Class | Air Brake Ftgs/Tubing/Accessories |
Fitting Type | Compression - Nylon |
Style | DOT |
Material | Brass |
Configuration | Nut |
Connection Type A | Tube |
Fitting Dimension A | 1/4 " |
Size | 1/4 |
UNSPSC #: | 25171700 |
TAA Compliant: | No |
Weight: | 0.07 lb |
Product Restrictions
California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov
