Drop-In Anchor, Steel, 1/4 x 1"
(Pack of
25)
SKU:96952 Item#: 96952
• An all-steel anchor
• Use with standard bolts for flush mount applications in concrete or masonry
• Designed to provide high holding strength with relatively shallow embedment depths
1. Drill hole 1/8" deeper than anchor length for flush mounting. Where surface deterioration is present, drill hole slightly deeper to permit anchor to be recessed.
2. Drop anchor into hole. If hole is slightly undersized, tap anchor with hammer until it bottoms in hole.
3. To set expander plug, installation tool can be struck a few sharp blows with a hammer, or an automatic air tool or electric tool can be used.
4. Place fixture in position, insert bolt and tighten.
Couldn't load pickup availability
Frequently Bought Together
Pin Drive Anchor Mushroom Head Nylon 1/4 x 3/4"
Couldn't load pickup availability
Wing-Type Toggle Bolt Anchor Steel #10-24 x 4"
Couldn't load pickup availability
Wing-Type Toggle Bolt Anchor Steel #6-32 x 2"
Couldn't load pickup availability
Drop-In Anchor High Strength 3/4-10 x 6-1/2"
Couldn't load pickup availability
5/8 Drop In Anchor
Couldn't load pickup availability
3/4 Drop In Anchor
Couldn't load pickup availability
Self-Drilling Screw Hex Head #12-14 x 1"
Couldn't load pickup availability
Hex Nut Grade 5 Steel 5/16-18
Couldn't load pickup availability
Flat Washer Grade 12 Thru-Hardened Steel M6
Couldn't load pickup availability
Stepdown Butt Connector 16 to 14/12 to 10 AWG
Couldn't load pickup availability
Superbutt Connector 16 to 14 AWG Blue
Couldn't load pickup availability
Self-Drilling Screw Hex Head 1/4-14 x 1"
Couldn't load pickup availability
Product Description
• An all-steel anchor• Use with standard bolts for flush mount applications in concrete or masonry
• Designed to provide high holding strength with relatively shallow embedment depths
1. Drill hole 1/8" deeper than anchor length for flush mounting. Where surface deterioration is present, drill hole slightly deeper to permit anchor to be recessed.
2. Drop anchor into hole. If hole is slightly undersized, tap anchor with hammer until it bottoms in hole.
3. To set expander plug, installation tool can be struck a few sharp blows with a hammer, or an automatic air tool or electric tool can be used.
4. Place fixture in position, insert bolt and tighten.
Technical Specifications
| Item#: | 96952 |
|---|---|
| Diameter | 1/4 " |
| Overall Length | 1 " |
| Type | Expansion Drop-In Anchor |
| Drill Size | 3/8 " |
| Allowable Tension (4,000 psi Concrete) | 418 lb |
| Allowable Shear (4,000 psi Concrete) | 495 lb |
| UNSPSC #: | 31162101 |
| TAA Compliant: | No |
| Weight: | 0.51 lb |
