Hollow Wall Screw Anchor, Steel, Zinc Finish, Long Style, 7/16" Drill Size, 1/4-20
(Pack of
50)
Zinc rust-resistant finish
1. Drill hole recommended diameter. Push anchor into hole and tap until flush with wall surface.
2. Turn screw with screwdriver anchor will expand and hold firmly.
3. Remove screw, place fixture over anchor, place screw through fixture and anchor, tighten.
NOTE: Holding power is dependent on the strength of wall material.
Couldn't load pickup availability
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
Catalog page#: 6-34
Frequently Bought Together
Conical Screw Anchor Kit Plastic 101Pcs
Couldn't load pickup availability
Mini Self-Drilling Wall Anchor Steel 1-1/4"
Couldn't load pickup availability
Wing-Type Toggle Bolt Anchor Steel 1/4-20 x 4"
Couldn't load pickup availability
USS Flat Washer Thru-Hardened Steel 5/16"
Couldn't load pickup availability
Self-Drilling Screw Hex Head 1/4-14 x 1"
Couldn't load pickup availability
SAE Flat Washer Thru-Hardened Steel 5/8"
Couldn't load pickup availability
Vision Pro Super
Couldn't load pickup availability
Flat Washer Grade 12 Thru-Hardened Steel M8
Couldn't load pickup availability
SAE J995C Locknut with Nylon Insert Grade 8 3/8-16
Couldn't load pickup availability
Wing-Type Toggle Bolt Anchor Steel #10-24 x 4"
Couldn't load pickup availability
SnapSkru® Standard Self-Drilling Wall Anchor Nylon
Couldn't load pickup availability
Tamper-Proof Nail Drive Anchor Steel 1/4 x 1-1/4"
Couldn't load pickup availability
Product Description
Zinc rust-resistant finish1. Drill hole recommended diameter. Push anchor into hole and tap until flush with wall surface.
2. Turn screw with screwdriver anchor will expand and hold firmly.
3. Remove screw, place fixture over anchor, place screw through fixture and anchor, tighten.
NOTE: Holding power is dependent on the strength of wall material.
Technical Specifications
| Item#: | 25177 |
|---|---|
| Length | 2-7/8 " |
| Type | Wall Anchor |
| Body Diameter | 3/8 " |
| Diameter | 1/4 " |
| Material | Steel |
| Screw Diameter | 1/4-20 Long |
| Finish | Zinc |
| Drill Size | 7/16 " |
| Anchor Size | 1/4 x 2-7/8 " |
| Minimum Wall Thickness | 5/8 " |
| Maximum Wall Thickness | 1-1/4 " |
| Screw Length | 2-1/2 " |
| Wall Thickness | 5/8 to 1-1/4 " |
| Sleeve Length | 7/8 " |
| UNSPSC #: | 31162103 |
| TAA Compliant: | Yes |
| Weight: | 2.96 lb |
Product Restrictions
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
